Rock Crusher Machine Price (2026): From $8,500 Mini Jaws to Six-Figure Tracked Crushers

A rock crusher costs anywhere from $8,500 for a small Chinese diesel jaw crusher (PE 250×400, offered new from Zhengzhou) to $97,000 for a towable US-sold micro jaw crusher rated 20 to 49 tons per hour, $182,000 for a 50 tph model, and six figures used for full-size tracked machines: a 2016 Sandvik QJ341 (up to 400 tph) sold for €179,000 with 4,386 hours. Prices checked 20 November 2026.

🪨Rock Crusher Price Tracker
Updated: November 2026
US micro jaw crusher, 20-49 tph, new$97,000
Grade / ItemLowHighUnit
Small Chinese PE 250x400 jaw crusher, new8,5008,500USD
US micro jaw crushers, new (20-58 tph)97,000182,000USD
Demo / last-listed micro crushers146,000198,500USD
Used Sandvik QJ341, 2016, 4,386 h (sold)179,000179,000EUR
Dealer and marketplace prices on the date shown; freight, duty and wear parts extra. Full rock crusher guide

Three very different markets, one name

  • Mini crushers from China: small jaw crushers such as the PE 250×400, sold direct by Chinese makers, with small diesel or electric motors. They crush slowly and come with freight, duty and no local service, but the entry price is a tenth of anything else.
  • Micro and compact crushers (US-sold): towable jaw crushers aimed at contractors who crush their own concrete, asphalt and stone on site instead of hauling it away. Dealers publish prices and monthly financing.
  • Full-size mobile crushers: tracked jaw and impact crushers from Sandvik, Metso, RUBBLE MASTER, Kleemann and others, at 150 to 450 tph. Makers quote per project rather than publishing prices, so the visible market is used machines.

Rock crusher prices we could verify

Machine Capacity Condition Price
Mingyuan PE 250×400 small mobile diesel jaw crusher, 11 kW Small-batch work New (2025), from China US$8,500 or near offer, plus VAT, ex Zhengzhou
VYKIN 49-JC micro jaw crusher, 48 HP Yanmar diesel, 25.6″ x 13.8″ jaw 20-49 tph New (US dealer) $97,000 (listed down from $102,000); financing about $1,770 a month over 60 months
VYKIN 50-JC jaw crusher, 24″ x 17″ jaw About 50-58 tph New (US dealer) $182,000 (listed down from $198,000); a 37-hour demo unit $146,000
Senya 6 micro crusher (discontinued; replaced by larger VYKIN models) Up to 80 tph Last listed new price $198,500, optional 100 kW generator $50,500
Sandvik QJ341 tracked jaw crusher, 1,200 x 750 mm inlet Up to 400 tph Used, 2016, 4,386 hours Sold at €179,000 (Equippo, delivered France to Spain)
RUBBLE MASTER RM 70GO! to RM J110X compact and mobile crushers 150-450 tph New Price on request; the maker publishes specifications but no prices

Machineseeker listing, VYKIN dealer pages, Equippo sold listing and RUBBLE MASTER’s site, checked 20 November 2026. Dealer pages show some inconsistent figures (the 49-JC also appears at $87,000 to $92,500 “starting” in places), so get the configured price in writing.

Our analysis: price per ton of hourly capacity

Dividing price by rated capacity makes the tiers comparable (our calculations, using mid-range capacities):

  • VYKIN 49-JC: $97,000 for roughly 35 tph is about $2,800 per tph.
  • VYKIN 50-JC: $182,000 for about 54 tph is about $3,400 per tph.
  • Used Sandvik QJ341: €179,000 for up to 400 tph is roughly €450 per tph.

Big iron is five to seven times cheaper per unit of capacity, even bought used. What the micro crushers sell is not capacity but access: they tow behind a truck, fit on small sites, need no lowboy or operator crew, and are financed like a pickup. A contractor crushing a few hundred tons of demolition concrete a month saves disposal and aggregate trucking without ever needing 400 tph. A quarry or large recycler thinks in €-per-tph and buys the tracked machine.

The $8,500 machine is a different tool altogether. With an 11 kW engine it has a fraction of the throughput of a 48 HP micro crusher, and the price excludes ocean freight, duty, unloading and any support. For occasional small-batch crushing (a landscaper, a small mine sampling ore) it can make sense; as the heart of a crushing business it usually does not.

Costs beyond the machine

  • Wear parts: jaw plates and, on impact crushers, blow bars are consumables; ask the dealer for prices and expected life in your material.
  • Power or fuel: diesel for mobile machines, or a generator (the Senya option was $50,500) or grid connection for electric ones.
  • Feeding and screening: an excavator or loader to feed, and a screen if you sell graded product.
  • Dust and permits: water suppression and local air and noise rules; check before buying, not after.

Practical advice

Start from the tons per month you will actually crush and the hardest material in the mix, then size the machine to do that in two or three days a week, not flat out. Ask every seller the same questions: rated capacity in your material at your output size, wear-part prices, engine tier and warranty, and delivered cost to your yard. For used tracked crushers, hours, jaw condition and undercarriage decide value; an inspection costs far less than a seized 50-tonne machine. And compare owning against hiring a crushing contractor for your volume; below a few thousand tons a year, hiring often wins.

Jaw, cone and impact: matching the crusher to the rock

The machines in our tables are mostly jaw crushers, and that is no accident: a jaw is the standard primary crusher, squeezing rock between a fixed and a moving plate, tolerant of big feed and simple to maintain, which is why the entry point of the whole market is a small Chinese jaw. Cone crushers come after the jaw in larger operations, refining the product to tighter sizes for concrete and asphalt spec work, and impact crushers (like the VYKIN units above) shine on softer rock and on recycling concrete and asphalt, where they produce a well-shaped product and handle rebar contamination better than a jaw’s plates. The budget translation: a demolition recycler comparing a jaw and an impactor of similar price is really choosing between feed tolerance and product shape, while a hard-rock quarry should not be shopping impactors at all, because blow bars wear out fast in abrasive stone and the consumables bill erases the purchase savings.

Wear parts: the cost that never stops

Crushing is controlled destruction, and the machine participates. Jaw plates, cone liners and impact blow bars are consumable by design, cast in manganese steel that work-hardens under impact, and their replacement schedule is the dominant running cost after fuel. The honest comparison between two machines therefore needs three numbers the brochure omits: the price of a wear set, the tonnes it lasts in your rock (abrasive granite and soft limestone differ by multiples), and the labor hours to change it. Diesel is the other constant companion; tracked mobile crushers run hungry engines, and the per-tonne fuel burn at your actual throughput belongs in the model. This is exactly why the per-tph analysis in this guide matters more than sticker price: a cheap crusher with expensive, short-lived wear parts is a subscription dressed as a purchase.

Mobile tracked, wheeled or stationary

The same jaws and cones arrive in three packages. Tracked mobile units, the VYKIN and Sandvik class above, walk around the site and between sites on low-loaders, and their premium buys exactly that mobility; they rule demolition recycling and short-term aggregate jobs. Wheeled portable plants tow between sites but need a tractor unit and more setup, trading some convenience for lower cost. Stationary plants, bolted to concrete with dedicated feeders and conveyors, deliver the lowest cost per tonne at quarry scale but zero flexibility. The decision follows the material: if the rock comes to you (recycling yards) or you move often (contract crushing), tracked mobility pays; if you own the deposit and will crush it for a decade, stationary wins and the used market for mobile units is where your capital goes further.

Permits, dust and noise: the operating licence

Crushers attract regulation wherever they run. Dust suppression (water sprays at the crusher mouth and transfer points) is a compliance requirement in most jurisdictions, not an option; noise limits can dictate operating hours near habitation; and mobile crushing on demolition sites often needs its own permits separate from the demolition itself. None of this is exotic, but the water supply, generator capacity for sprays, and the paperwork timeline belong in the project plan beside the machine quote, because a parked crusher burns money at exactly the daily rate the financing section of your business plan promised it would earn.

FAQs

How much does a rock crusher machine cost? From about $8,500 for a small Chinese jaw crusher, $97,000 to $182,000 for US-sold towable micro crushers, and six figures for full-size machines; a used 2016 Sandvik QJ341 sold at €179,000.

How much is a mobile crusher per month? One US dealer finances a $97,000 micro crusher at about $1,770 a month over 60 months.

Why don’t big brands publish crusher prices? Full-size machines are configured per project (jaw size, screens, options, support), so makers like RUBBLE MASTER publish specifications and quote individually.

See our heavy equipment cost guide, concrete testing machine prices and how we research prices.

Published November 2026. Sources: Machineseeker PE 250×400 listing, VYKIN 49-JC, VYKIN 50-JC, VYKIN/Senya 6 page, Equippo sold QJ341 and RUBBLE MASTER. Prices change; confirm with sellers.

Leave a Comment

Your email address will not be published. Required fields are marked *

Scroll to Top