Mammography Machine Price: $40,000 Refurbished 2D to $500,000 New 3D Systems (2026)

A mammography machine costs about $110,000-$225,000 new for 2D digital and $235,000-$500,000 new for 3D tomosynthesis, delivered and installed; refurbished runs $40,000-$95,000 (2D) and $95,000-$225,000 (3D), roughly 40-60% below new (Medical Outfitters, reviewed 26 October 2026). The same dealer’s Hologic-specific guide puts a refurbished Selenia Dimensions 3D at $110,000-$175,000.

🩹Mammography Machine Price Tracker
Updated: October 2026
3D tomosynthesis, new, all-in (Medical Outfitters)$235,000–$500,000
Grade / ItemLowHighUnit
2D digital, refurbished40,00095,000USD
2D digital, new110,000225,000USD
3D tomosynthesis, refurbished95,000225,000USD
Hologic Selenia Dimensions 3D, refurbished110,000175,000USD
All-in dealer pricing per Medical Outfitters (Oct 2026); regulatory costs quoted per site. Full scrap price index
Note — This page covers equipment purchase prices for facilities, not screening fees for patients, and is not medical advice. Mammography is tightly regulated in the US: MQSA inspection, ACR accreditation, physicist surveys and room shielding are mandatory, recurring and quoted per site, on top of every price below.

Price by system class

Class Refurbished (all-in) New (all-in)
2D digital mammography $40,000 to $95,000 $110,000 to $225,000
3D tomosynthesis $95,000 to $225,000 $235,000 to $500,000

Source: Medical Outfitters mammography cost guide, reviewed 26 October 2026; delivered, installed, calibrated and warrantied.

Price by model

Model Refurbished New
Hologic Selenia (2D, discontinued) $40,000 to $70,000 —
GE Senographe Essential 2D $45,000 to $75,000 —
Siemens MAMMOMAT Inspiration (2D / 3D) $50,000-$85,000 / $120,000-$175,000 —
Hologic Selenia Dimensions (2D config) $60,000 to $95,000 est. $150,000 to $220,000
Hologic Selenia Dimensions 3D $110,000 to $175,000 est. $250,000 to $350,000
GE Senographe Pristina / Siemens MAMMOMAT Revelation $150,000 to $225,000 est. $300,000 to $500,000
Hologic 3Dimensions $160,000 to $225,000 est. $300,000 to $500,000
Fujifilm ASPIRE Cristalle (sold new) — $180,000-$225,000 (2D); $235,000-$295,000 with tomo

Source: Medical Outfitters model guides, 26-28 October 2026. That dealer is not a Hologic, GE or Siemens dealer, so its “new” figures for those brands are list-price comparison estimates, marked “est.” above; refurbished bands are its own sourced-on-request pricing.

Our analysis

The 3D premium is a software-and-license story as much as hardware. The tomosynthesis sweep tube and faster detector matter, but reconstruction software and its license, plus biopsy and contrast options, carry much of the $100,000+ gap between 2D and 3D versions of the same platform. Ask every vendor what is licensed versus installed.

Buy 3D-capable even if you start with 2D. The dealer guide is blunt: a 2D-only system can rarely be upgraded later, while a 3D-capable platform can start life running 2D and license tomosynthesis when volume justifies it.

Regulatory overhead is a permanent line item. Unlike general X-ray, mammography carries mandatory MQSA inspections (FDA fee schedule), ACR accreditation renewed every three years, and annual physicist surveys; none are in the sticker price and all recur.

Practical advice

  • Quote the full compliance calendar (physicist, ACR, MQSA) alongside the machine; a cheap unit with an expensive compliance history is not cheap.
  • For refurbished, ask for tube exposure count and detector age in writing; the detector is the expensive failure.
  • Confirm the quote is all-in: delivery, rigging, installation, calibration and first-year warranty.

Why the market moved to 3D, and what that does to used 2D prices

Tomosynthesis reconstructs a stack of thin image slices instead of one flat exposure, which reduces the tissue-overlap problem that makes dense breasts hard to read, and over the past decade it moved from premium option to the default expectation at new screening sites in the US. The pricing consequence is visible in the tables above: late-generation 2D systems like the GE Senographe Essential and Siemens MAMMOMAT Inspiration 2D now sit at $45,000-$85,000 refurbished, clinically capable but discounted hard, because buyers fear being left with a platform patients and referrers see as yesterday’s standard. That makes refurbished 2D either a trap or a bargain depending on your situation: for a high-volume screening center competing for referrals it is a trap, while for a low-volume rural or second-unit role it is the cheapest MQSA-compliant imaging money can buy. Know which buyer you are before the discount tempts you.

The compliance calendar, spelled out

Mammography is the one modality where US federal law dictates the quality program, and the recurring obligations deserve a plain list because every one of them is a cost outside the machine price. MQSA requires an annual inspection with fees set by the FDA’s schedule. ACR accreditation, which nearly all payers require, involves image submission and physicist testing, renews every three years, and is billed per unit on the ACR’s own fee schedule. A qualified medical physicist must survey the unit annually and after major repairs, quoted per survey. Technologists and interpreting physicians carry their own mammography-specific credentialing. None of these amounts appears in any equipment table, ours included, because they are set by regulators and physicists rather than dealers, but a realistic budget treats them as a permanent annual line next to the service contract.

Used-unit checklist: tube, detector, licenses

Three components decide whether a refurbished mammography quote is honest. The X-ray tube has a finite exposure life, and on a screening unit doing dozens of studies a day it is the big-ticket wear item; ask for the exposure counter reading in writing. The digital detector is the most expensive single part of the machine and degrades with age and handling; ask its manufacture date and whether it was replaced during refurbishment. Software licenses are the quiet one: tomosynthesis, synthesized-2D and CAD features are licensed, licenses do not always transfer with the chassis, and a “3D-capable” unit without a transferred tomo license is a 2D unit with potential. A dealer quote that itemizes tube count, detector age and license status is comparable; one that does not is a photograph of a machine.

Room, workflow and the rest of the project

The machine lands in a room that must be shielded to a physicist’s plan, with the control area protected, and mammography’s positioning workflow also cares about room layout more than most modalities. On the IT side, tomosynthesis studies are enormous compared with 2D images, so PACS storage and network capacity need checking before the first patient, and reading workstations with mammography-approved displays are their own budget item if the site does not already have them. Facilities adding stereotactic or contrast-enhanced biopsy options should price them at purchase: the hardware and licenses cost far less bundled into the initial deal than retrofitted later, which is the same license economics that drives the 2D-versus-3D decision itself.

How facilities actually pay for these machines

At $95,000-$500,000 for 3D systems, most buyers finance. Equipment leases and loans in this class are routine, and the practical comparison is the monthly cost against the facility’s screening volume and reimbursement mix rather than the sticker price. The structural reason the refurbished market is deep here is the same as in CT: large health systems refresh fleets on schedule and their trade-ins become the $110,000-$225,000 Hologic units in the table above, usually with plenty of clinical life left. For a private imaging center, the sweet spot the dealer bands point to is a refurbished Selenia Dimensions 3D with documented tube and detector status, which delivers the standard-of-care exam at roughly the price of a new 2D unit.

FAQs

How much does a mammography machine cost? New: $110,000-$225,000 (2D) or $235,000-$500,000 (3D tomosynthesis), installed. Refurbished: $40,000-$225,000 depending on class and model (Medical Outfitters, Oct 2026).

How much is a refurbished Hologic 3D unit? Selenia Dimensions 3D about $110,000-$175,000; the newer 3Dimensions $160,000-$225,000.

Why is 3D so much more than 2D? Tomosynthesis hardware plus separately licensed reconstruction software and options.

Is a refurbished 2D unit a bad buy? For a referral-competitive screening center, usually; for a low-volume or second-unit role, it is the cheapest MQSA-compliant option on the market.

What three things decide a used quote’s honesty? Tube exposure count, detector age, and whether tomosynthesis and CAD licenses transfer; demand all three in writing.

What recurring compliance costs apply? Annual MQSA inspection (FDA fee schedule), ACR accreditation renewed every three years, and annual physicist surveys, all priced by regulators and physicists rather than dealers.

See our digital X-ray machine guide, our CT scanner price guide, and how we research prices.

Updated November 2026. Sources: Medical Outfitters mammography cost guide (reviewed 26 October 2026), Medical Outfitters Hologic price guide (28 October 2026). Prices change; confirm with dealers and budget per-site regulatory costs.

Leave a Comment

Your email address will not be published. Required fields are marked *

Scroll to Top