A commercial dishwasher costs $6,378 for a CMA high-temp undercounter, $9,300.90 for Hobart’s LXNH-30 undercounter, and $9,427-$11,872 for Hobart’s own two door-type sub-brands, Ecoline and Centerline, both rated at the same 51 racks per hour, per dealer listings checked 21 November 2026. That last pair is the tell: one manufacturer, one throughput, $2,445 apart, which is brand laddering priced in the open, and the racks-per-dollar math it creates is the most useful arithmetic in the category.
| Grade / Item | Low | High | Unit |
|---|---|---|---|
| High-temp undercounters (CMA / Hobart) | 6,378 | 9,301 | USD |
| Door type 51 racks/hr (Ecoline / Centerline) | 9,427 | 11,872 | USD |
| Clearance undercounter floor (one dealer) | 6,295 | 6,295 | USD |
The ladder across two dealers
| Machine | Format / throughput | Price |
|---|---|---|
| CMA UC65E (high temp) | Undercounter, 30 racks/hr | $6,378 |
| Hobart LXNH-30 (booster included) | Undercounter, 32-48 racks/hr | $9,300.90 |
| Ecoline by Hobart EDH-1 | Door type, 51 racks/hr | $9,427 |
| Centerline by Hobart CDH-1 (booster built in) | Door type, 51 racks/hr | $11,872 |
Burkett (CMA, Hobart LXNH) and KaTom (Ecoline, Centerline) listings, checked 21 November 2026. Burkett’s clearance rack of undercounters starts at $6,295.
Racks per dollar: the arithmetic that sorts the table
Dividing price by hourly rack rating, the Ecoline door machine delivers a rack-hour for about $185, the CMA undercounter $213, the Centerline $233, and the premium Hobart undercounter $291. Two lessons fall out. First, the door-type format is the throughput bargain: at the same money as the premium undercounter, the EDH-1 washes sixty percent more racks, because the undercounter’s price buys its footprint, a dish machine that fits under a bar top, not its speed. Second, the $2,445 between Hobart’s own Ecoline and Centerline at identical throughput prices the build and feature delta between a value line and a standard line from one factory’s catalog, the cleanest same-maker brand ladder we’ve measured since the air dryer series premiums, and a useful calibration for reading every rival pair in the market.
High temp or low temp: the sanitizing fork
Every machine in our table sanitizes with heat, a final rinse near 180F, usually via a booster heater that is either built in, as on the Centerline and LXNH, or a line item that must be checked on every quote. The alternative tier, low-temp machines, sanitizes with chemicals instead: cheaper machines, no booster, but a chlorine-based consumable bill forever and a rinse that some glassware and plastics tolerate poorly. The fork is the category’s first decision because it sets the operating model, high temp pays electricity and buys its sanitizer with heat, low temp pays a chemical subscription, and the familiar rule from our parts washer guide applies: settle the chemistry, then shop the hardware. Energy-recovery models like Hobart’s LXN line narrow the electricity gap by scavenging heat from their own exhaust, an efficiency feature that also trims the ventilation requirement.
The installation stack: water, power and steam
The quote is not the installed cost. High-temp machines want serious electrical service, the CDH-1 runs three-phase, and the booster’s draw is the quiet reason a quoted machine sometimes cannot go where the old one stood. Water quality matters commercially the way it does in our espresso and autoclave coverage: hardness scales boosters and jets, so softening or filtration belongs in hard-water installs. Door-type machines want a hood or a ventless energy-recovery design, dish tables on both sides, and a pre-rinse station; undercounters escape most of that, which is the other half of their footprint premium. Budget the install conversation with the quote, because a $9,400 machine that needs a $4,000 electrical and ventilation visit is a different purchase than its sticker suggests.
Racks, rinse water and the per-cycle bill
n
The operating bill runs on three meters: electricity for wash heat and the booster, water per rack, the LXNH-30 lists 0.62 gallons of rinse per rack, and the detergent-rinse-aid pair that every machine consumes whatever its sanitizing chemistry. The rack rating itself deserves a planning haircut, like scrubber coverage and every brochure throughput in this series: rated racks per hour assume a loaded rack waiting every cycle, and a real dish pit with one operator loads, scrapes and stages between cycles, so sizing at half to two-thirds of rating against the rush hour’s dish load is the honest method. The racks themselves, flat, peg and glass, are cheap but not free, and a bar that runs all glassware should budget glass racks by the stack, because the machine is only as fast as the clean racks waiting beside it.
Who buys which format
Undercounters serve bars, cafes and low-volume kitchens, bought for the footprint and the glassware. Door types are the full-service restaurant’s machine, sized to a dish pit with tables flanking them. Above our table, conveyor and flight machines serve cafeterias and institutions at quote-based prices, the same volume wall as every category’s top tier. Leasing is unusually common here, dish machines are often placed by chemical companies on service contracts whose machine is cheap and whose detergent is not, the consumable-subsidized hardware model, razor and blades at restaurant scale, and the lease-versus-buy arithmetic should always price the chemical contract’s detergent against open-market detergent before the “free” machine wins. The used market trades on pump condition, element scale and door alignment; a descaled, tested machine from a closed restaurant is one of the food-service equipment market’s reliable bargains, as our Carpigiani guide found for frozen dessert machines.
Our analysis
Format sets the price before the brand does. The door-type format buys rack-hours at $185-$233 while the undercounter format pays up to $291 for the privilege of fitting under a counter; buyers with floor space should not pay footprint prices for throughput they can have cheaper standing up.
The same-maker ladder is the market’s honest ruler. Hobart pricing its own Ecoline $2,445 under its Centerline at identical throughput shows what a value-versus-standard build is worth from one factory, and any rival premium larger than that gap needs a named feature, a booster, energy recovery, a warranty, to justify itself.
Practical advice
- Choose the sanitizing chemistry first; it sets the operating bill, the glassware outcomes and the hardware list.
- Compare machines in racks per dollar within a format, and formats by the floor plan.
- Confirm the booster is in the quote; “booster included” and “booster required” look alike on spec sheets.
- Price the chemical contract’s detergent before accepting a placed machine; the free machine has a subscription inside.
- Walk the install path, power, hood, dish tables, water treatment, before the machine is ordered.
FAQs
How much does a commercial dishwasher cost? $6,378-$9,301 for high-temp undercounters, $9,427-$11,872 for 51-rack door types from Hobart’s own two lines, with conveyor machines quote-based above (dealers, 21 Nov 2026).
High temp or low temp? High temp sanitizes with a 180F rinse and pays in electricity; low temp sanitizes with chemicals and pays forever in consumables. Chemistry first, hardware second.
Undercounter or door type? Door type is the throughput bargain at $185-$233 per rack-hour; the undercounter premium buys the footprint, which bars and cafes are right to pay.
Why do two same-throughput Hobarts differ by $2,445? Ecoline is the value line, Centerline the standard line, one factory pricing its own build ladder, a useful ruler for judging every other premium.
What does installation add? Electrical service, often three-phase, a hood or ventless design, dish tables and water treatment in hard-water towns; walk the path before ordering.
Are chemical-company “free” machines a deal? Price their detergent contract against open-market detergent first; the machine is the razor, the chemicals are the blades.
See our industrial washing machine guide, our Carpigiani ice cream machine guide, and our walk-in cooler guide and our ice machine guide and our espresso machine guide and our commercial range guide and our deep fryer guide and how we research prices.
Updated November 2026. Sources: Burkett CMA UC65E and Hobart LXNH-30 listings, KaTom Ecoline EDH-1 and Centerline CDH-1 listings, all checked 21 November 2026. Racks-per-dollar figures are our arithmetic from listed ratings.


