A new or near-new tri-axle dump truck lists for about $196,000 to $242,000 on dealer lots: 2026 Western Star 47X trucks with delivery miles at $170,980-$210,980 and a 2024 Kenworth T800 with 13,978 miles at $242,000. Used trucks fall fast with miles and age: 2019-2020 Kenworth T880s and Mack Granites at $124,900-$169,995, 2014-2017 trucks at $85,000-$122,950, and older or high-mile tandems at $40,000-$80,000. A 2015 Peterbilt 365 with under 98,000 miles listed at just $75,900, a reminder that condition and spec, not the badge, set the price.
| Grade / Item | Low | High | Unit |
|---|---|---|---|
| Used 2019-2022 tri-axle | 124900 | 192900 | USD listed |
| Used 2014-2017 tri-axle | 75900 | 122950 | USD listed |
| Older / high-mile tandem | 40000 | 79900 | USD listed |
| 2024 Kenworth T800, 13,978 mi | 242000 | 242000 | USD listed |
New and near-new trucks
| Truck | Axle | Miles / hours | Listed price |
|---|---|---|---|
| 2026 Western Star 47X (505 hp, Autostick) | Tandem | 248 mi | $170,980 |
| 2026 Western Star 47X (Cummins, Autostick) | Tri | 113 mi | $195,980 |
| 2026 Western Star 47X | not stated | 18-2,380 mi | $210,980 |
| 2025 Kenworth T880 (450 hp) | Tri | 32,425 mi / 1,511 hrs | $199,729 |
| 2025 Mack Granite 64FR | Quad | 1,173 hrs | $219,900 |
| 2025 Kenworth T880 (510 hp) | Tri | 24,872 mi / 1,584 hrs | $225,000-$227,900 |
| 2024 Kenworth T800 (500 hp, 17.5 ft body) | Tri | 13,978 mi | $242,000 |
Used trucks by age
| Truck | Axle | Miles / hours | Listed price |
|---|---|---|---|
| 2024 Kenworth T880 (455 hp) | Tri | 126,853 mi | $172,900 |
| 2022 Mack Granite GR84F (16 ft) | Tri | 158,918 mi | $185,995 |
| 2021 Kenworth W900 (500 hp) | Tri | 249,121 mi | $192,900 |
| 2021 Mack Granite 84FR | Tri | 11,563 hrs | $149,900 |
| 2020 Kenworth T880 | Tri | 332,647 mi / 13,072 hrs | $125,000-$169,900 |
| 2020 Mack Granite 64FR / 84FR | Tri | 155,276-275,804 mi | $125,000-$169,995 |
| 2020 Peterbilt 567 (19.5 ft) | Tri | 11,467 hrs | $124,900 |
| 2019 Kenworth T800 (Cummins X15) | Tri | 633,000 mi | $146,000 |
| 2019 Peterbilt 365 (510 hp) | Tri | 276,247 mi | $220,000 |
| 2017 Kenworth T880 (455 hp) | Tri | 359,846 mi | $109,900 |
| 2017 Mack Granite GU713 | Tri | 421,056 mi / 18,971 hrs | $85,000-$122,950 |
| 2015 Mack Granite GU713 | Tri / Tandem | 160,729 mi / 495,433 mi | $109,989 / $79,900 |
| 2015 Peterbilt 365 (Cummins ISX12) | Tri | 97,846 mi | $75,900 |
| 2016 Mack Pinnacle CXU613 | Tandem | 732,812 mi | $40,000 |
| 2004 International WorkStar 7600 | Tri | 343,589 mi | $42,500 |
My Little Salesman dealer listings, checked 22 November 2026; mileage and hours as listed. One 2020 Mack 64FR is described as tandem in its text but tri-axle in its axle field. We left out a 2019 Freightliner Cascadia at $54,500, a highway tractor model listed in the dump category, and a 1979 Chevrolet Bruin at $15,500 as a vintage outlier.
What sets the price
Age and usage do most of the work: on this tape, 2024-2026 trucks list around $170,000-242,000, 2019-2022 trucks mostly $125,000-193,000, and 2014-2017 trucks $75,000-123,000. Axle configuration is the second variable, because it sets legal payload: a tri-axle carries more than a tandem and earns more per load, and quad-axle and super-dump configurations carry more still where state rules allow. Body length, engine horsepower and transmission add smaller premiums: a 500-510 hp engine, an automated or Autostick transmission and a longer 17-20 ft body all appear on the more expensive listings. Then come the outliers that only inspection explains: a 2019 Peterbilt 365 at $220,000 sits above much newer trucks, while a 2015 Peterbilt 365 with under 98,000 miles lists at $75,900. Spec, body type, condition and the seller’s own pricing all move a used dump truck by tens of thousands of dollars.
Miles, hours and what to inspect
Dump trucks often idle and run the hydraulics on site, so many listings show engine hours instead of, or as well as, miles; 11,000-19,000 hours on a truck with modest miles means a lot of on-site running. Ask for both figures and service records. The inspection list is longer than for a highway truck: the dump body floor and sides for thinning and cracks, the hoist cylinder and its seals, the PTO and hydraulic pump, frame rails for cracks near the body hinge, the suspension and lift axles, brakes and tyres, and, on newer trucks, the emissions system, where repairs are expensive. A pre-purchase inspection by a heavy-truck mechanic is cheap compared with any of those repairs.
Body types and truck classes
“Dump truck” covers several very different machines, and price comparisons only work within one type. The listings here are mostly heavy, Class 8 straight trucks with steel or aluminium dump bodies, the standard tool for aggregate, asphalt and fill. Within that group, the body matters: a standard square or half-round body suits most materials, longer bodies carry more volume for lighter loads, and aluminium bodies cost more but save weight, which raises legal payload. Super dumps add a trailing axle behind the body for extra legal weight in states that allow it. Separate markets entirely are light-duty dump trucks built on chassis like the Ford F-550 and Chevrolet 3500, used by landscapers for small loads; off-road articulated haulers used in quarries and large earthworks; and end-dump or belly-dump trailers pulled by a tractor. Each has its own price band, so check that a listing’s type matches what you need before comparing it with the figures above.
Ownership costs beyond the price
A dump truck’s running costs are substantial and belong in any purchase decision. Fuel is the largest variable cost for a truck working full days; tyres on a tri-axle are numerous and expensive; insurance for a heavy commercial vehicle, with a driver who needs a commercial licence, is a significant annual line; and permits, registration and heavy-vehicle use taxes add more. Dump-specific maintenance, hoist and PTO service, body floor replacement and hydraulic repairs, comes on top of normal truck service. Owner-operators should build a cost-per-load model from local fuel prices, insurance quotes and haul rates before deciding between a newer, more expensive truck with lower repair risk and an older one with a smaller payment but higher maintenance.
Buy, finance or hire
Most owner-operators finance a dump truck, and the monthly payment on a $125,000 used truck versus a $200,000 new one is the real decision, together with insurance, fuel, tyres, permits and maintenance. Contractors who need trucks only for a short project usually hire trucks with drivers rather than buying, because the truck, the driver and the compliance burden come together. We have not found reliable published hourly hire rates to quote here, since they vary widely by region, truck type and material hauled; get local quotes. For a fleet adding capacity, the used tape above shows where value sits: three-to-six-year-old tri-axles with documented maintenance offer most of a new truck’s capability for roughly $50,000-100,000 less.
Our analysis
Year bands are wide, and outliers are common. The same 2015 model year spans $75,900 to $111,995, and a 2019 truck lists above many 2025 trucks. Treat any single listing as a negotiation starting point, and compare trucks of similar spec, miles and hours rather than year alone.
Hours matter as much as miles. Dump trucks spend much of their working lives idling and lifting, so an hour meter reading in the teens of thousands can mean more wear than the odometer suggests.
Practical advice
- Decide the axle configuration from the loads and roads you’ll run, and check your state’s weight rules before choosing.
- Ask for engine hours, miles and full service history on every truck.
- Inspect the body floor, hoist, PTO and frame near the hinge; these are the expensive dump-specific repairs.
- Budget emissions system maintenance on newer diesels.
- Get a pre-purchase inspection from an independent heavy-truck mechanic.
- Compare financing offers; on a six-figure truck, the rate matters as much as the price.
FAQs
How much does a dump truck cost? New tri-axle trucks list for about $196,000-242,000; used trucks range from about $40,000 for older high-mile tandems to $190,000+ for late-model tri-axles.
How much is a used Kenworth T880 dump truck? Recent listings ran $109,900 for a 2017 with about 360,000 miles, $125,000-169,900 for 2020 trucks and $172,900 for a 2024.
How much is a used Mack Granite dump truck? About $79,900-122,950 for 2015-2017 trucks and $125,000-185,995 for 2020-2022 trucks.
Tandem or tri-axle? Tri-axles carry more legal payload and cost more; tandems are cheaper and more manoeuvrable for smaller loads and tight sites.
Why do some dump trucks show hours instead of miles? Because they spend much of their time idling and running hydraulics on site; hours track engine wear that miles miss.
Is it cheaper to hire a dump truck? For short projects, usually yes, since the hire includes the driver and compliance; rates vary by region, so get local quotes.
See our backhoe price guide, our mini excavator price guide, our heavy equipment cost guide, and our concrete mixer truck price guide and our bulldozer price guide and our articulated dump truck price guide and how we research prices.
Sources: My Little Salesman tri-axle dump truck listings and dump truck listings (page 2), checked 22 November 2026. Listed prices are dealer asking prices, not sold prices.


