Concrete Mixer Truck Price: $278,000 New to $37,000 Fleet Trucks

A new concrete mixer truck lists for about $225,000 to $278,000: two 2025 Kenworth T880 tri-axles with delivery miles at $237,695 each, a 2024 Peterbilt 567 at $225,000 and a new 2026 International HX620 with a 10.5-yard Continental drum at $278,000. Late-model used trucks hold value: a 2021 Kenworth T880 with an 11-yard Beck drum at $190,000 and a 2023 Mack Granite with an 11-yard McNeilus drum at $135,000. Then the market drops off a cliff: a fleet of 2015-2017 Freightliner 114SD tri-axles with 10-yard drums listed at $37,000-$40,000 each, and mid-2000s trucks at $15,000-$55,000.

🚚Concrete Mixer Truck Tracker
Updated: Dealer and private listings 22 Nov 2026
New tri-axle mixer (2025 Kenworth T880)$237,695
Grade / ItemLowHighUnit
New, range listed225000278000USD
Late-model used (2018-2023)135000190000USD
Fleet 2015-2017 Freightliner 114SD3700040000USD each
Mid-2000s trucks1500055000USD
My Little Salesman listings. 22 Nov 2026. Full scrap price index

New and late-model trucks

Truck Drum Miles / hours Listed price
2026 International HX620 (new, 6×4) Continental 10.5 yd not listed $278,000
2024 Terex Advance FD4000 (front discharge) not listed 6,954 mi / 710 hrs $270,000
2025 Kenworth T880 (tri-axle 8×4, two units) not shown 975-1,093 mi $237,695 each
2024 Peterbilt 567 (tri-axle 8×4) not shown 1,310 hrs $225,000
2021 Kenworth T880 Beck 11 yd 55,092 mi $190,000
2018 Kenworth T880 Beck 11 yd 78,845 mi / 6,198 hrs $170,000
2023 Mack Granite McNeilus 11 yd 19,800 mi / 1,720 hrs $135,000 (private seller)
2024 Mack MD short-load mixer Ernest Shortstop 3.5 yd not shown $114,500

Used fleet trucks and older mixers

Truck Drum Miles / hours Listed price
2015-2017 Freightliner 114SD tri-axle (8 units) Beck 10 yd 120,671-197,093 mi $37,000-$40,000 each
2016 Kenworth W900S (6×4) McNeilus Bridgemaster 10.5 yd listed as 1 hr $82,000 (private seller)
2006 Mack E7 not shown 288,000 mi $55,000
2007 Mack Granite CV713 (6×4) not shown 36,062 engine hrs $43,900
2007 Kenworth W900B McNeilus 11 yd not listed $39,500
2005 Mack CV513 (8×4) not shown 245,000 mi $37,900
2008 Mack 11 yd 24,000 hrs $25,000 / $35,000 (two listings)
2005 Mack Granite CV713 not shown 200,000 mi $28,000
2005 Sterling LT8500 not shown 214,428 mi $26,900
2005 International Paystar 5500 (quad axle) 10.5 yd 293,105 mi $15,000

My Little Salesman listings across three pages, checked 22 November 2026. The same 2008 Mack with 24,000 hours appears at $35,000 on one page and $25,000 on another, probably a price change; the 2016 Kenworth W900S shows 1 hour on its meter, which almost certainly reflects a replaced or reset meter rather than a new truck. We left out a 2016 International SF667 at $29,500 that needs an engine, a 2003 Advance at $5,500 and a 1987 International at $18,500 sold as project trucks, and several listings in the category that are concrete pump trucks, not mixers.

What sets the price

Age is the dominant variable, and the curve is steep: new and nearly new tri-axle mixers list at $225,000-278,000, three-to-seven-year-old trucks at $135,000-190,000, and anything from roughly 2015 back falls to $37,000-55,000, a drop that is much sharper than for dump trucks of the same age. The reason is how mixers are used. A ready-mix truck spends long days with the drum turning and the engine running, often in stop-start urban work, and the drum, its drive, the hydraulic pump and the water system wear in ways that are expensive to restore. Fleets typically sell trucks in batches once they reach a replacement point, which is why eight near-identical Freightliner 114SDs appear together at $37,000-40,000: the price reflects plentiful supply of trucks at the end of their first fleet life, not a fault in each one. Drum size and brand are the second variable: 10-11 yard drums from McNeilus, Beck, Continental and similar makers are standard for full-size trucks, while short-load units like the 3.5-yard Ernest Shortstop on a Mack MD are a separate, smaller market. Front-discharge trucks such as the Terex Advance, which let the driver place concrete from the cab, sit at the top of the price range.

Inspecting a used mixer

Beyond a normal heavy-truck inspection, a mixer needs its own checks. Look inside the drum for worn or thinning fins and for hardened concrete build-up, which adds weight and reduces capacity. Check the drum rollers, the drum drive and gearbox, and the hydraulic pump and motor for leaks and noise; replacing a drum drive or the drum itself is a major cost. Inspect the chute, the water tank and system, the controls and the frame around the pedestal for cracks. Ask how many hours the drum has run, not only the engine, and ask for the maintenance records. Many fleet trucks are sold in sets, so if several are offered, inspect more than one and pay for the best rather than the first.

New, late-model or fleet truck: which buyer is which

The three price bands on this page suit three different buyers. Ready-mix producers running trucks every day buy new or nearly new, because uptime, warranty coverage and emissions compliance matter more than the purchase price when a truck breaks down with a loaded drum. Smaller producers and contractors who pour regularly but not every day often buy late-model used trucks in the $135,000-190,000 band, which keep most of the new truck’s reliability at a meaningful discount. The $15,000-55,000 fleet trucks suit buyers with their own shop and mechanics, rural producers with lighter schedules, or operators who need a spare truck for peak season; for them, a cheap truck plus planned repairs can beat a payment on a newer one. Matching the band to the duty cycle is the single most useful decision in this market, and comparing a $37,000 fleet truck with a $237,695 new one only makes sense once you know which buyer you are.

Our analysis

Mixers depreciate faster than most construction trucks. A tri-axle that lists near $238,000 new can be a $37,000-40,000 truck at around ten years old with under 200,000 miles, because the drum and its drive wear with every load. That makes older mixers cheap to buy and expensive to run, while late-model trucks hold their value well in the first few years.

Fleet sell-offs set the floor. When a ready-mix fleet retires a batch of identical trucks at the same price, that price becomes the reference for every other truck of similar age; buyers with a choice of units should inspect several and pick the best.

Practical advice

  • Decide on drum size and axle configuration from your typical loads and state weight rules before comparing trucks.
  • Ask for engine hours, drum hours and full service records; drum condition matters as much as the engine.
  • Inspect the drum interior, fins, rollers, drive and hydraulics in person or through an independent mechanic.
  • Treat an unusual hour reading, like the 1-hour W900S, as a question to answer, not a selling point.
  • For small jobs, consider short-load trucks or hiring ready-mix delivery instead of buying a full-size mixer.
  • Budget for the commercial licence, insurance and permits that a heavy mixer requires.

FAQs

How much does a concrete mixer truck cost? New trucks list for about $225,000-278,000; late-model used trucks $135,000-190,000; and older fleet trucks from about $15,000 to $55,000.

How much is a used Kenworth T880 mixer? Recent listings ran $170,000 for a 2018 and $190,000 for a 2021 with 11-yard Beck drums, and $237,695 for 2025 trucks with delivery miles.

Why are older mixer trucks so cheap? Drums, drives and hydraulics wear heavily, and fleets sell trucks in batches at the end of their first service life, which keeps prices low.

What size drum is standard? 10 to 11 cubic yards on full-size trucks; short-load mixers carry about 3.5 yards.

What is a front-discharge mixer? A truck that pours from the front, controlled from the cab, like the Terex Advance FD4000 listed at $270,000.

Should a small contractor buy a mixer? Usually not; ordering ready-mix delivery or using a short-load supplier is cheaper unless you pour concrete most days.

See our dump truck price guide, our concrete compression machine price guide, our heavy equipment cost guide, and our concrete pump truck price guide and how we research prices.

Sources: My Little Salesman mixer listings (page 1, page 9 and listing page), checked 22 November 2026. Listed prices are dealer and private-seller asking prices, not sold prices.

Leave a Comment

Your email address will not be published. Required fields are marked *

Scroll to Top