Universal Hardness Testing Machine Price (2026): Rockwell, Brinell, Vickers and Portable Testers

A bench Rockwell hardness tester costs about $2,956 for an analog model and $6,460 to $10,771 for a digital or load-cell model, while a universal hardness tester that does Rockwell, Brinell and Vickers on one frame is listed at $25,645 to $26,935. Portable rebound testers start near $1,290. Prices below are distributor list prices for one maker’s range, checked 14 November 2026.

🔧Hardness Testing Machine Price Tracker
Updated: November 2026
Phase II 900-450 universal tester (US dealers)$25,645 – 26,935
Grade / ItemLowHighUnit
Portable rebound (Leeb) tester1,287.732,843.79USD
Analog Rockwell bench tester2,955.865,919.26USD
Digital / load-cell Rockwell tester6,460.2110,770.61USD
Brinell bench tester8,615.4126,934.61USD
Micro and macro Vickers tester8,184.3753,872.46USD
Universal (Rockwell, Brinell, Vickers)25,644.8726,934.61USD
Distributor list prices for the Phase II range on the date shown; tax, freight and verification extra. Full hardness tester guide

What “universal” means in a hardness tester

Hardness is measured by pressing an indenter into the metal under a known force and measuring the result. Each method has its own indenter, force range and standard:

  • Rockwell measures the depth of indentation (diamond cone or ball). It is fast and the most common shop-floor test. Standards: ASTM E18 and ISO 6508.
  • Brinell presses a large ball and measures the diameter of the dent, suiting castings, forgings and coarse-grained metals. Standards: ASTM E10 and ISO 6506.
  • Vickers (macro and micro) uses a diamond pyramid and measures the diagonals of the dent under a microscope or camera, for thin parts, coatings and case-depth work. Standards: ASTM E92, ASTM E384 and ISO 6507.
  • Portable rebound (Leeb) testers bounce an impact body off the surface and convert the rebound speed to a hardness value, for large parts that cannot go on a bench. Standard: ASTM A956.

A universal hardness tester combines Rockwell, Brinell and Vickers on one machine, using a load cell and motor instead of dead weights so it can apply the very different forces each method needs.

Hardness tester prices by type

To keep the comparison like-for-like, the table uses one manufacturer’s current US range (Phase II) at one distributor, so differences reflect the type of machine rather than brand or dealer.

Model Type List price (USD)
PHT-1700 Portable rebound tester, D impact device $1,287.73
PHT-1800 Portable rebound tester $1,611.01
PHT-1840C Portable, DL impact device, certified test block $2,843.79
900-331 Analog Rockwell bench tester $2,955.86
900-331D Rockwell with digital indicator $3,764.06
900-345 Superficial Rockwell, analog $4,033.46
900-375 Twin Rockwell and superficial, analog $5,919.26
900-410 Digital Rockwell, touch screen $6,460.21
900-440 Twin Rockwell with load cell and touch screen $10,770.61
900-355 Brinell with load cell $8,615.41
900-358 Brinell, automatic Z-axis $14,809.46
900-359 Brinell, automatic Z-axis and CCD video $20,197.46
900-390A Micro Vickers, manual software $8,184.37
900-398A Digital macro Vickers, manual software $11,848.21
900-505 Fully automated micro Vickers $53,872.46
900-450 Universal: Rockwell, Brinell and Vickers $26,934.61

TEquipment Phase II price list (“Your Price”), checked 14 November 2026. Test Equipment Depot lists the same 900-450 universal tester at $25,644.87, with member pricing after login. Tax and freight extra.

What the universal tester includes

The Phase II 900-450 applies its test force through a closed-loop control unit with a load cell and DC motor rather than dead weights, has an automated Z-axis so a test runs after pressing start, displays to 0.1 HR resolution and claims accuracy of up to 0.5% at all test loads. The dealer lists accessories for all three methods: indenters, hardness test blocks, microscopes and a Vickers camera with software. Ask for the exact force range and the indenter list in writing, because neither dealer page we checked gives the load range.

Our analysis: one universal machine or three separate ones?

The numbers make an interesting comparison. Buying a digital Rockwell tester (900-410, $6,460.21), a Brinell tester (900-355, $8,615.41) and a digital macro Vickers tester (900-398A, $11,848.21) separately adds up to $26,923.83, within $11 of the universal 900-450 at $26,934.61. So the universal machine does not save money on paper; what it saves is bench space, and it gives one interface and one service contract.

The trade-off is throughput and risk. Three machines let three people test at once, and if one breaks, the other two methods keep running. A universal tester is a single point of failure and swapping indenters and fixtures between methods takes time. For a lab that runs mostly Rockwell with an occasional Brinell or Vickers check, the universal tester makes sense. For a production floor running hundreds of Rockwell checks a shift, a dedicated Rockwell tester plus outsourced Brinell or Vickers work is usually cheaper.

Also note the spread within each method. A Rockwell tester runs from $2,955.86 (analog, dead weights) to $10,770.61 (twin scale, load cell, touch screen), a 3.6-times difference. The extra money buys digital readout and data export, superficial scales for thin material and load-cell force control, not a different hardness value on the same part.

Costs beyond the machine

  • Test blocks: certified blocks for each scale you use, needed for daily checks. Note how the portable PHT models cost about $163 more with a certified block included.
  • Verification and calibration: the standards require periodic indirect verification by an accredited agency; ASTM E18 sets a maximum interval of 12 months for Rockwell machines. Budget for an annual service visit.
  • Indenters and anvils: diamond indenters wear or chip and are expensive to replace; ask the price of a spare.
  • Software and data: automatic Vickers and Brinell systems depend on camera software; check licence terms and Windows compatibility.
  • Bench and environment: a solid, vibration-free bench and a clean, temperature-stable room.

Practical advice

List the materials, thicknesses and the specifications your customers quote (for example HRC, HRB, HB or HV values), then choose the method those specifications call for, not the most versatile machine. Ask the dealer for a demonstration on your own parts and test blocks, the verification certificate supplied with the machine, the accreditation of whoever will do the annual verification, and the price and lead time of spare indenters. If you are buying a portable tester, remember that rebound readings depend on part mass and surface finish and are converted to other scales, so they are a screening tool, not a replacement for a bench test when a specification demands one.

FAQs

How much does a universal hardness testing machine cost? The Phase II 900-450 universal tester (Rockwell, Brinell and Vickers) is listed at $26,934.61 by TEquipment and $25,644.87 by Test Equipment Depot, checked November 2026.

How much is a Rockwell hardness tester? About $2,956 for an analog bench model and $6,460 to $10,771 for digital or load-cell models in the same range.

Is a portable hardness tester good enough? For large parts and screening, often yes. Prices start around $1,290. For acceptance testing against a bench-method specification, a bench tester is usually required.

How often does a hardness tester need calibration? Daily checks with certified test blocks, plus indirect verification by an accredited agency at least every 12 months for Rockwell testers under ASTM E18.

See our concrete compression testing machine guide, CNC machine prices and how we research prices.

Published November 2026. Sources: TEquipment Phase II price list, Test Equipment Depot 900-450 listing and the ASTM and ISO standards named above. Prices change; confirm with the dealer.

Leave a Comment

Your email address will not be published. Required fields are marked *

Scroll to Top