Plasma Cleaning Machine Price (2026): Benchtop Plasma Cleaners New and Used

A benchtop plasma cleaner costs about EUR 4,970 to EUR 7,434 for a compact Harrick Plasma PDC-32G and about EUR 7,131 to EUR 9,595 (US $8,415 to $11,322) for the larger Expanded Plasma Cleaner, depending on the vacuum pump and options. Used PDC-32G units sell on eBay for about $1,900 to $2,000. Industrial low-pressure and atmospheric plasma systems from makers such as Diener are quoted individually.

⚛Plasma Cleaner Price Tracker
Updated: November 2026
Harrick PDC-32G (new)EUR 4,970 – 7,434
Grade / ItemLowHighUnit
Harrick PDC-32G, used$1,900$1,999.99USD
Harrick PDC-32G, newEUR 4,970EUR 7,434EUR
Harrick Expanded, newEUR 7,131EUR 9,595EUR
Harrick Expanded, new (US)$8,415$11,322USD
Sample trays$102$490USD
Distributor and marketplace prices on the date shown. Full plasma cleaner guide

What a plasma cleaning machine does

A plasma cleaner creates a low-pressure gas plasma inside a chamber that removes organic contamination from surfaces and activates them. Labs use it to clean slides, wafers and optics, to bond PDMS to glass in microfluidics, and to prepare surfaces for coating or adhesion. Industrial lines use larger vacuum chambers or atmospheric plasma nozzles to treat plastics, metals and electronics before bonding, printing or coating.

Plasma cleaner prices

Machine Condition Price Source
Harrick PDC-32G Basic (compact) Used, very good $1,900 or best offer eBay
Harrick PDC-32G Basic Used $1,999.99 eBay dealer
Harrick Compact Basic Plasma Cleaner PDC-32G New, by configuration EUR 4,970 to EUR 7,434 Darwin Microfluidics
Harrick Expanded Plasma Cleaner (PDC-001/002) New, by configuration EUR 7,131 to EUR 9,595; US $8,415 to $11,322 Darwin Microfluidics
Sample trays for Harrick cleaners (Pyrex or quartz) New EUR 86 to EUR 415; US $102 to $490 Darwin Microfluidics
Diener Zepto 2.6-litre low-pressure system New On request Diener electronic

Prices checked November 2026. The range for each new Harrick model reflects the pump and options chosen.

Our analysis: the pump is part of the price

A benchtop plasma cleaner needs a vacuum pump, and the gap within each Harrick price range is largely the pump and accessories. When comparing quotes or used listings, check whether a pump, hoses and sample tray are included; a used chamber without a pump is cheaper but not ready to use. Durability is a point in favour of buying used: one researcher on a microscopy mailing list reported using a Harrick plasma cleaner from about 1991 for over 30 years with no maintenance cost, though that is one user’s experience.

Which size?

  • Compact (PDC-32G): small samples, slides and microfluidic chips; the lowest-cost option.
  • Expanded (PDC-001/002): about four times the chamber capacity, for batches and larger substrates.
  • High-power expanded: roughly twice the cleaning rate of the expanded model.
  • Industrial systems: larger chambers, automation and atmospheric plasma for production lines, priced on request.

Buyer checklist

  • Chamber size for your largest sample or batch.
  • Pump included, and oil-sealed or dry pump.
  • Gas options: room air, or oxygen and argon via a flow mixer.
  • Voltage: 115 V and 230 V versions exist.
  • For used units: RF output working, door seal condition and pump hours.

Harrick, Henniker or Diener?

Three names dominate benchtop plasma cleaning. Harrick Plasma, based in Ithaca, New York, is described in a market report as the global sales leader for benchtop sample plasma cleaners, and it publishes its configurations through distributors. Henniker Plasma in the UK sells the HPT-100 and HPT-200 by quotation; in 2025 it ran a promotion upgrading any HPT-100 order to the larger, higher-power HPT-200 at no extra cost, a sign that list prices in this market are negotiable. Diener electronic in Germany sells low-budget systems such as the Zepto and Atto, also by quotation. When comparing, ask each supplier for the same configuration: chamber size, RF power, pump type and gas inlets.

Has the price gone up?

Researchers presenting at the 2014 AIChE Annual Meeting described commercial plasma cleaners as costing about $4,000, which was expensive enough that they developed a low-cost microwave plasma method for sealing PDMS microfluidic devices and compared it against a Harrick PDC-32G. In 2026 a compact Harrick PDC-32G is listed at EUR 4,970 to EUR 7,434 depending on configuration. The configurations are not identical, so treat the comparison as a rough indication that entry-level plasma cleaners have become somewhat more expensive over a decade, while used units at about $2,000 remain the budget route.

Does it pay for itself?

Henniker argues that a lab coating its own cell-culture plates with an HPT-100 would recover the system’s cost after about 700 plates, or 350 runs, compared with buying pre-treated cultureware. That is a manufacturer’s calculation, but the method is useful: compare the cost of what the plasma cleaner replaces, such as bought-in treated consumables, outsourced bonding or failed devices, with the price of the system.

The pump is part of the price

Much of the spread in new Harrick prices is the vacuum pump and options, and a used chamber without a pump is not ready to use.

The practical advice

Choose the chamber size for your largest sample, confirm what the quote includes, and consider a used Harrick with its pump if your budget is tight; these units are known for long service lives.

FAQs

How much is a plasma cleaning machine? About EUR 5,000 to EUR 7,400 new for a compact Harrick benchtop cleaner, EUR 7,100 to EUR 9,600 for the expanded model, and about $2,000 used.

Do I need a separate pump? Usually yes; check whether it is included in the quote.

See more lab and testing equipment prices, including our laser cleaning machine guide, and how we research prices.

Additional sources: Henniker HPT-100 upgrade offer, Henniker cultureware payback, AIChE 2014 paper and APO Research market report.

Published November 2026. Sources: Darwin Microfluidics (EU), Darwin Microfluidics (US), eBay used PDC-32G, eBay dealer listing, Harrick Plasma brochure, Diener Zepto and 3DEM mailing list. Prices change; confirm with suppliers.

Leave a Comment

Your email address will not be published. Required fields are marked *

Scroll to Top