A plastic extruder runs from about $133 for a desktop filament unit on eBay to $8,000-$18,000 for an entry-level industrial single screw machine, $45,000-$200,000+ for twin screw compounding extruders, and $180,000-$500,000+ for complete turnkey lines (MQ Extrusion guide, July 2026; eBay listings, November 2026). Here is the full breakdown and the extras that quietly add 10-20%.
| Grade / Item | Low | High | Unit |
|---|---|---|---|
| Desktop / benchtop (eBay) | 133 | 2,759 | USD |
| Entry industrial single screw | 8,000 | 18,000 | USD |
| Twin screw compounding | 45,000 | 200,000 | USD |
| Complete turnkey line | 180,000 | 500,000 | USD |
Price by machine class
| Class | Typical price (new) | Notes |
|---|---|---|
| Desktop / benchtop filament extruders | $133 to $2,759 | eBay listings, Nov 2026: basic 110V DIY units $133-$474; SJ35 mini single screw $1,599 pre-owned to about $2,759 new |
| Entry industrial single screw (lab, small batch) | $8,000 to $18,000 | MQ Extrusion, Jul 2026 (FOB China) |
| 65mm single screw, standalone | $22,000 to $55,000 | $50,000-$90,000 with calibration and cutting downstream |
| Twin screw compounding extruder | $45,000 to $200,000+ | 75mm parallel twin screw $80,000-$160,000; pelletizing adds $15,000-$40,000 |
| Complete turnkey line | $180,000 to $500,000+ | Large PVC profile lines $120,000-$220,000; big pipe lines up to $350,000 |
Industrial figures are FOB China ranges from MQ Extrusion’s July 2026 pricing guide; desktop figures from live eBay listings, 20 November 2026.
Price by product line
| What you make | Line price (new, FOB) |
|---|---|
| Mono-layer blown film (55mm extruder) | $28,000 to $50,000 |
| 3-layer co-extrusion blown film | $90,000 to $180,000 |
| Pipe, 20-63mm | $60,000 to $130,000 |
| Pipe, 110-630mm | $150,000 to $350,000 |
| PVC/UPVC profile (two die sets) | $120,000 to $220,000 |
| PP strap | $45,000 to $90,000 |
Source: MQ Extrusion machine pricing guide, July 2026.
The used market is quote-driven
US dealers such as Arlington Machinery, Plastiwin and KD Machinery list used industrial extruders almost entirely as “request quote”. A typical example on SurplusRecord in November 2026: a 2.5″ Davis-Standard Thermatic 250S single screw with 5,480 hours, quote only. MQ Extrusion’s guide says used or refurbished equipment typically cuts upfront cost by 30 to 50 percent, which matches what dealers tell buyers, but you will not see sticker prices online; you negotiate.
Our analysis
The machine is roughly half the project. MQ Extrusion’s guide puts freight, installation, training and spare parts at 10-20% on top of the machine price, and dies alone run $3,000 to $30,000+ each, with PLC control upgrades adding $8,000-$20,000. On a $40,000 65mm extruder, a realistic budget with one die set, downstream equipment and installation lands closer to $70,000-$100,000 (our estimate from the component figures above).
The desktop-to-industrial gap is about 10 to 40 times. A $1,600-$2,800 benchtop SJ35 produces fractions of a kilogram per hour; an $18,000 entry industrial machine is a different category of throughput. If you are costing a real production business, the benchtop numbers are irrelevant except for prototyping.
Practical advice
- Get FOB and landed cost quoted separately; freight and duty on a multi-tonne machine are significant.
- For used machines, ask for hours, screw/barrel wear measurements, and a power-on test; a worn screw set costs $8,000-$25,000 to rebuild.
- Twin screw only pays off for compounding and filled materials; for straightforward pipe or profile, single screw does the job for far less.
Single screw or twin screw: the real dividing line
The price gap between single and twin screw machines in the table reflects a genuine difference in what they do. A single screw extruder melts and pushes: it takes pelletized resin and delivers a steady melt to the die, which covers pipe, profile, sheet and film, the overwhelming majority of extrusion work. A twin screw extruder mixes: its intermeshing screws knead fillers, colors, additives and regrind into the polymer, which is why compounding, masterbatch production, recycling with heavy contamination, and PVC powder processing live on twins. The buying error this section exists to prevent: paying the $45,000-$200,000 twin-screw premium for a job a $22,000-$55,000 single screw does perfectly, or the reverse, trying to compound filled materials on a single screw and blaming the machine for the streaked output. Describe your material in the quote request, resin, regrind percentage, fillers, and let the geometry follow from it.
Reading an extruder spec sheet
Four numbers on the spec sheet carry the price. Screw diameter sets the output class, which is why the 65 mm machine is the table’s benchmark. The L/D ratio, barrel length over diameter, sets melting quality: longer barrels (30:1 and up) melt more gently and mix better, and they cost more metal and more money. Output in kg/h is the commercial number, but check it is quoted for your material, since a machine rated on easy-flowing polyethylene delivers less on rigid PVC. Motor power and the drive type close the list; the main motor is a large share of machine cost, and modern lines pair it with inverter or servo control for energy efficiency. Two machines with the same diameter can differ thousands of dollars on L/D, motor and gearbox quality alone, which is most of the spread inside every band in our table.
Energy, cooling and the cost per kilogram
Extrusion is continuous production, so the economics compound hourly. Electricity dominates running cost: the main drive plus barrel heaters run all shift, and this is where modern efficient drives quietly beat worn-out bargains, since a few percent of efficiency on a machine running thousands of hours a year is real money. Cooling water for the calibration and cooling train is the second utility, and compressed air the third. Material waste is the hidden fourth: startup scrap, purging between colors and off-spec product all cost resin, and the better machines with stable temperature control simply waste less. When comparing a cheap machine against a dearer one, ask each supplier for the specific energy consumption (kWh per kg of output) on your material; suppliers of efficient machines volunteer this number, and the silence of the others is itself an answer.
Dies, downstream and changeover
The extruder is the pump; the die and downstream equipment make the product. Dies at $3,000-$30,000+ each (per the MQ Extrusion figures above) are product-specific tooling, so a shop planning three pipe sizes and two profiles is budgeting five tooling sets, not one. Downstream, pipe needs vacuum calibration tanks, haul-offs and cutters; film needs the blown-film tower and winders; profiles need calibration tooling matched to each die. Changeover time between products is a cost the brochure never states: cheap lines change slowly, and a line that loses half a shift per changeover needs longer runs to stay economic. Buyers consolidating from the product side, as our related guides on molding machines show, repeatedly find the same lesson: quote the complete line for the actual product list, not the headline machine.
Commissioning an imported line
The FOB ranges in this guide become a working factory through a sequence worth pricing in advance: sea freight for what is usually several crates or containers, duty and local taxes, rigging to the pad, utility hookups, and then commissioning, where the supplier’s technician (or your integrator) runs the line to spec on your material. Insist on an acceptance protocol tied to output and scrap rates rather than a handshake, keep a spare-parts list (screws and barrels wear; heaters and thermocouples fail first) in the first shipment, and get the control system’s documentation in a language your electricians read. The suppliers’ own 10-20% freight-install-training allowance from our sources is the right planning number; the projects that overrun it are usually the ones that skipped the acceptance protocol.
FAQs
How much does a plastic extruder machine cost? $8,000-$18,000 entry industrial, $22,000-$55,000 for a 65mm single screw, $45,000-$200,000+ twin screw, per MQ Extrusion’s July 2026 guide; desktop units start around $133 on eBay.
How much does a full extrusion line cost? Roughly $180,000 to $500,000+ turnkey, depending on product and output.
Is used worth it? Typically 30-50% cheaper, but the market is quote-only; inspect wear before paying.
Single screw or twin screw? Single melts and pushes (pipe, profile, film); twin mixes (compounding, filled and contaminated materials). Let the material decide, not the brochure.
Which spec numbers drive the price? Screw diameter, L/D ratio, rated output on your material, and motor/drive quality; the spread inside each price band is mostly these.
What should commissioning include? An acceptance protocol tied to output and scrap on your material, spare screws/heaters in the first shipment, and documentation your team can read.
See how we research prices our Plastic Molding Machine Price guide and our Blow Molding Machine Price (2026): New Chinese PET Blowers vs Used Bekum, Uniloy and Kautex.
Updated November 2026. Sources: MQ Extrusion pricing guide (July 2026), eBay plastic extruder listings, SurplusRecord listing (Arlington Machinery). Prices change; confirm with suppliers.


