Blow Molding Machine Price (2026): New Chinese PET Blowers vs Used Bekum, Uniloy and Kautex

A blow molding machine costs about $2,300 to $5,300 new for a small Chinese semi-automatic PET bottle blower, about $8,000 to $22,800 for automatic Chinese machines for 5-litre to 5-gallon bottles, and $40,000 to $175,000 used for Western extrusion and injection blow molders from Bekum, Uniloy and Kautex. High-output PET stretch blow molding lines from Sidel, Krones and Nissei ASB run from about $100,000 to over $1 million.

🥤Blow Molding Machine Price Tracker
Updated: November 2026
Used Western EBM$40,000 – $175,000
Grade / ItemLowHighUnit
Semi-auto PET blower$2,300$5,300USD new
Automatic PET blower 5 L$8,000$12,000USD new
Automatic PET 5 L to 5 gal$22,800$22,800USD new
Bekum H111, used$40,000$49,900USD
Uniloy 350R2 3-head, used$59,500$59,500USD
Uniloy IBS injection blow, used$175,000$175,000USD
Kautex KBSH 2-60, usedEUR 130,000EUR 130,000asking
Supplier and used-equipment asking prices on the date shown. Full blow molding guide

Three kinds of blow molding

  • Stretch blow molding (SBM) heats PET preforms and blows them into bottles for water, drinks and oil. Small semi-automatic machines need an operator to load preforms; automatic and rotary machines run continuously.
  • Extrusion blow molding (EBM) extrudes a tube of HDPE, PP or PVC and blows it into containers such as jerry cans, detergent bottles and drums.
  • Injection blow molding (IBM) makes small, precise bottles for pharmaceuticals and personal care.

New machine prices (China)

Machine Output Price
Semi-automatic PET blower for bottles up to 10 L Small batches $2,300 to $2,600
2-cavity semi-automatic PET blower about 800 to 1,500 bottles an hour $2,800 to $4,500
LS-B5L 2-cavity, 1 to 7 L bottles 600 bottles an hour $5,300 (1 set); $4,800 (2 or more)
Fully automatic 5 L PET blower Automatic $8,000 to $12,000
Automatic PET blower, 5 L to 5 gallon (19 L) Automatic $22,800

Alibaba and Accio supplier listings, FOB China, checked November 2026. Moulds for each bottle design, an air compressor and a chiller are usually extra.

Used machine prices

Machine Type Asking price Where
Bekum BA 52 Extrusion EUR 27,000 Europe
Bekum H111 Extrusion $40,000 to $49,900 US
Bekum 60 mm extrusion blow molder Extrusion $43,500 (reduced) US
Sidel SBO2 PET stretch blow EUR 40,000 Europe
Uniloy M20L Extrusion EUR 48,000 Europe
Uniloy 350R2, 3 heads Extrusion $59,500 US
Jingye WIB-65 Blow molding EUR 92,000 Europe
Kautex KBSH 2-60 Extrusion EUR 130,000 Europe
Uniloy-Milacron continuous extrusion dual shuttle Extrusion $149,500 US
Uniloy UIB 189-3 / IBS 189 Injection blow $175,000 US

Asking prices on eBay, Machinio, Resale and Exapro, mostly “or best offer”. A US dealer puts used high-output PET stretch blow molding lines at $100,000 to over $1 million.

Our analysis: reading a used blow molder listing

Asking prices are opening positions. Several listings above say “or best offer” or “just reduced”, which signals room to negotiate. What the sale price should depend on:

  • Age and control generation: many machines on sale were built in the 1980s and 1990s and still run, but old controls and parison programmers can be hard to repair.
  • Heads and tooling: the number of heads and whether moulds and head tooling for your container are included can change the value more than age.
  • Seen under power: dealers stress whether a machine can be inspected running. A machine you cannot see running carries more risk and should cost less.
  • Repair reserve: budget for heater bands, hydraulic seals, screws and barrels, and electrical work, and have a technician inspect before you commit.
  • Rigging and freight: large extrusion machines need professional rigging, which adds to the landed cost.

A new small Chinese PET blower at a few thousand dollars and a used Western machine at tens of thousands serve different jobs: the first suits a small water or oil bottling start-up, the second steady production of containers in HDPE or PP.

What else to budget

  • Moulds for each bottle or container design.
  • Compressed air: PET blowing needs high-pressure air, usually from a dedicated compressor.
  • Chiller and cooling water for moulds.
  • Preforms or resin supply, and a preform injection machine if you make your own.
  • Power: industrial machines need three-phase supply.

Questions to ask a seller

  • What containers, sizes and materials has the machine been running?
  • Which moulds, head tooling and spare parts are included?
  • Can I see it running under power, and when was it last serviced?
  • What control system does it use, and are parts still available?
  • Are rigging, crating and loading included in the price?

Reading used listings

Most used Western machines are listed “or best offer”, and the moulds, head tooling and whether you can see the machine running matter more than the year it was built.

The practical advice

For a small PET bottling start-up, a new Chinese semi-automatic blower and a compressor are enough. For HDPE or PP containers in volume, a used Bekum or Uniloy seen running, with tooling and parts support, is often better value. Budget for moulds, air, cooling and rigging.

FAQs

How much is a blow molding machine? About $2,300 to $5,300 for a small new Chinese semi-automatic PET blower, $8,000 to $22,800 for automatic Chinese PET blowers, and $40,000 to $175,000 used for Western extrusion and injection blow molders.

Is a used Bekum or Uniloy worth it? Often, for steady HDPE or PP production, if you can see it running and parts are available.

Do I need a compressor? Yes for PET stretch blowing, which uses high-pressure air.

See our plastic bag machine and pulp molding machine price guides and how we research prices.

Published November 2026. Sources: eBay used blow molders, Machinio, Resale, Exapro, Meadoworks, Accio PET blower listings and Alibaba LS-B5L listing. Prices change; confirm with sellers.

Leave a Comment

Your email address will not be published. Required fields are marked *

Scroll to Top