A plastic molding machine means an injection molding machine for most buyers, and in 2026 a new Chinese servo machine runs from about $22,000-$35,000 at 60 tons to $220,000-$320,000 at 1,000 tons (Daoben Machinery price list, February 2026), while used Western machines from US dealers run $15,000-$45,000 for a 50-100 ton hydraulic up to $1,000,000+ for 1,500+ ton electrics (Meadoworks, 2026). Desktop units start under $800 on eBay.
| Grade / Item | Low | High | Unit |
|---|---|---|---|
| 60 ton, new Chinese servo | 22,000 | 35,000 | USD |
| 200 ton, new Chinese servo | 48,000 | 72,000 | USD |
| Used 100-200 ton hydraulic (US dealers) | 25,000 | 80,000 | USD |
| 1,000 ton, new Chinese servo | 220,000 | 320,000 | USD |
New machines: price by clamping tonnage
| Clamping force | New price (FOB China, servo included) |
|---|---|
| 60 ton | $22,000 to $35,000 |
| 90 ton | $28,000 to $42,000 |
| 120 ton | $32,000 to $48,000 |
| 200 ton | $48,000 to $72,000 |
| 500 ton | $110,000 to $165,000 |
| 1,000 ton | $220,000 to $320,000 |
Source: Daoben Machinery injection molding price list, February 2026. Figures assume servo motors, PLC controls and basic safety features; the servo drive itself is roughly $15,000 of the price and typically saves $30,000-$50,000 in electricity over its life, per the same guide.
Used machines: hydraulic vs all-electric
| Tonnage | Used hydraulic | Used all-electric |
|---|---|---|
| 50-100 ton | $15,000 to $45,000 | $25,000 to $65,000 |
| 100-200 ton | $25,000 to $80,000 | $40,000 to $120,000 |
| 200-400 ton | $40,000 to $125,000 | $65,000 to $180,000 |
| 400-700 ton | $75,000 to $200,000 | $120,000 to $300,000 |
| 700-1,500 ton | $125,000 to $400,000 | $200,000 to $500,000+ |
| 1,500+ ton | $250,000 to $750,000+ | $400,000 to $1,000,000+ |
Source: Meadoworks used injection molding machine price guide, 2026. Ranges assume machines 5-15 years old in good working condition. All-electric machines run 30-50% above comparable hydraulics.
Brand tiers move the price 40-80%
Meadoworks groups used-market pricing into three tiers against a baseline: premium European and Japanese brands such as Arburg, Engel, Sumitomo Demag and KraussMaffei trade at 1.2-1.4x; Husky, Milacron, Toshiba, Nissei and JSW sit around 1.0-1.2x; and value brands such as Haitian, Chen Hsong and Borche go for 0.6-0.9x. The same guide notes premium brands retain 20-40% more resale value than comparable Asian-built machines, and machines with pre-2005 controls depreciate steeply because parts and service get hard to find.
Our analysis
New Chinese and used Western overlap almost exactly. A new 200-ton Chinese servo machine at $48,000-$72,000 lands in the same budget as a used 100-200 ton Western hydraulic at $25,000-$80,000. The trade: warranty and efficiency versus proven iron and local parts support. That overlap is the real buying decision in this market.
The machine is not the whole bill. Molds are a separate budget that can rival the machine itself for complex parts, and auxiliaries (dryer, chiller, robot, material handling) add more. Quote the full cell, not the press.
Other molding processes price differently. This page covers injection molding; we track blow molding machines and rotomolding machines separately, and plastic extruders for continuous profiles.
Practical advice
- Size the press by part and mold, not by budget: too little tonnage flashes parts, far too much wastes energy and floor loading.
- On used machines, ask for hours, last barrel/screw inspection and controller model; pre-2005 controls are a parts risk.
- Compare landed cost: FOB China prices exclude freight, duty, rigging and commissioning.
Sizing the press: tonnage, shot size and the mold
Clamping tonnage is the headline spec, but it is derived, not chosen: the part’s projected area and the material’s injection pressure decide how much force keeps the mold shut, and molders commonly work from rules of thumb in the range of a few tons per square inch of projected area. Shot size, the volume the screw can inject per cycle, matters just as much, because a press that clamps enough but cannot fill the cavity is useless, and one with a huge barrel making tiny shots degrades material through long residence time. Tie-bar spacing and mold height then determine whether your tooling physically fits. The practical consequence for pricing: bring your part drawings, or at least the biggest part you plan to run, to every quote conversation, because “a 200-ton press” is not a specification until the shot size and tie-bar numbers are attached, and the same tonnage with a bigger injection unit costs measurably more.
Hydraulic, electric and the energy bill
The used table’s 30-50% electric premium buys three things: energy, precision and cleanliness. Servo-electric machines draw power only while moving, while traditional hydraulics run pumps continuously, and that difference compounds over a multi-year, multi-shift life into electricity savings that are the entire argument for the premium; the new Chinese machines in our first table bundle servo drives as standard for the same reason. Electrics also repeat positions and pressures more precisely, which tightens part consistency for technical moldings, and they drop the hydraulic oil entirely, which cleanroom and medical molders require. The honest counterpoint: hydraulics are cheaper to buy, their technology is understood by every maintenance tech on earth, and a well-kept hydraulic press runs for decades, which is exactly why the used market is full of them at attractive prices. High-volume technical work justifies electric; a job shop running varied commodity parts often does better owning two hydraulics than one electric.
The mold is the other machine
Our analysis above says molds can rival the machine price, and the mechanism deserves a paragraph. An injection mold is a precision-machined steel assembly with cooling channels, ejection systems and often hot runners, built for your specific part; complexity, cavity count and expected lifetime drive its cost far more than size. A simple single-cavity prototype tool is cheap; a multi-cavity, hot-runner production tool for millions of cycles is a capital project in itself. The budgeting rule that keeps first-time buyers honest: price the mold and the press together for your actual first product, because a $50,000 press fed by an $80,000 tool is a normal combination, and the reverse, a cheap tool on an expensive press, usually signals a plan that has not met reality yet. Mold trials, texture, and revisions after first shots also belong in the timeline.
Auxiliaries and installation: the quiet third budget
Between press and mold sits everything else: a material dryer (mandatory for hygroscopic resins like nylon and PET), a hopper loader, a mold-temperature controller or chiller, granulators for regrind, and usually a robot or sprue picker once labor is counted honestly. None of these is individually dramatic, but together they commonly add a meaningful share on top of the press, and the facility adds its own lines: three-phase power sized for the heaters, compressed air, water for cooling circuits, and crane or rigging access for mold changes. Installation and commissioning of an imported press, from rigging through leveling to first-article trials, is a quoted project; ask the supplier whether a technician visit is included, because remote-video commissioning of a first machine is a false economy.
New Chinese, used Western, or new Western
The overlap we flagged, where a new 200-ton Chinese servo press costs what a used Western hydraulic does, resolves differently for different buyers. Choose the new Chinese machine when energy costs are high, parts support exists in your country (the large brands have built dealer networks), and warranty matters to your financing. Choose the used Western press when your maintenance team is strong, your parts are forgiving, and uptime risk is manageable, because proven iron at $25,000-$80,000 is how many successful shops started. New Western machines, which sit above both on price, earn their keep in regulated and high-precision niches where validation, documentation and OEM process support carry real value. Whichever route, the brand-tier multipliers in the section above are the market’s own summary of resale value and support quality, and they apply on the way out too: the press you buy today is also the trade-in you will sell later.
FAQs
How much does a plastic injection molding machine cost? New Chinese servo machines: about $22,000 (60 ton) to $320,000 (1,000 ton), per Daoben’s February 2026 list. Used Western machines: $15,000 to $1,000,000+ depending on tonnage, drive and brand, per Meadoworks.
Hydraulic or all-electric? Electrics cost 30-50% more used but cut energy and cycle variation; hydraulics are cheaper to buy and fix.
What does a small desktop unit cost? Benchtop injection machines for prototyping list under $800 on eBay (November 2026).
How is tonnage actually chosen? From the part’s projected area and material pressure, with shot size and tie-bar spacing checked alongside; bring part drawings to every quote.
What auxiliaries are mandatory? A dryer for hygroscopic resins, temperature control for the mold, and material handling; together they are a real share on top of the press.
Should the mold or the machine be budgeted first? Together, for your actual first product; production tooling routinely rivals the press price.
Updated November 2026. Sources: Daoben Machinery price list (February 2026), Meadoworks used machine price guide (2026), eBay molding machine listings. Prices change; confirm with suppliers.


