Anesthesia Machine Price: $8,995 Refurbished GE Workstations to Quote-Only New Flagships (2026)

A refurbished anesthesia machine costs about $9,000-$19,000 from US dealers with published prices: GE Aespire and Aestiva units run $8,995-$14,500, a re-certified Mindray A7 lists at $15,000, a refurbished Drager Fabius GS Premium at $11,500, and Penlon Prima units at $16,800-$18,750 (live dealer listings, 21 November 2026). New machines from GE, Drager and Mindray are sold on quotation only; one dealer’s re-certified GE Aespire 7900 at $11,595 is marked down from a $22,500 reference price, which hints at where new-era pricing sat.

💉Anesthesia Machine Price Tracker
Updated: November 2026
Refurbished GE workstation with modern vent (typical)$9,000–$15,000
Grade / ItemLowHighUnit
GE Aestiva / Aespire, refurbished8,99514,500USD
Mindray A7, re-certified15,00015,000USD
Penlon Prima (conventional / MRI)16,80018,750USD
New GE / Drager / Mindray flagships00quote-only
Live dealer listings (Integris, SW Medical, Quince) on the date shown. Full scrap price index
Note — This page covers equipment purchase prices for facilities and is not medical advice. Anesthesia machines are life-critical devices: biomedical inspection, vaporizer service and local regulatory compliance are mandatory and quoted separately.

Published refurbished prices (live listings)

Machine Condition Price Dealer
GE Datex-Ohmeda Aestiva 5 / Aestiva 3000 (7900 vent) Refurbished $8,995 Integris Equipment
GE Datex-Ohmeda S/5 Aespire (7100 vent) Used $8,995 Integris Equipment
Drager Fabius GS Premium Refurbished $11,500 Quince Medical
GE Aespire 7900 (PSVPro) Re-certified $11,595 (ref. $22,500) Integris Equipment
GE Aespire VIEW (PSVPro) Refurbished $11,995 Integris Equipment
GE Datex-Ohmeda S/5 Avance Used $14,500 Integris Equipment
Mindray A7 Re-certified $15,000 Integris Equipment
Penlon Prima 460 Refurbished $16,800 SW Medical
Penlon Prima 451 (MRI-compatible) Refurbished $18,750 SW Medical

Live listings checked 21 November 2026. Many dealer listings (Drager Apollo, GE Aisys Carestation and others) show “request quote” instead of a price.

What new machines cost

GE (Aisys CS2, Avance CS2), Drager (Perseus A500, Atlan) and Mindray (A8, A9) sell new machines through direct quotes and tenders, not published prices, so we do not print a new-machine table we cannot source. The visible anchors: a current-generation re-certified GE workstation referencing $22,500, and the fact that premium refurbished units top out near $19,000. New flagship workstations are a multiple of that; get written quotes for your configuration and service contract.

Our analysis

The refurbished market is unusually transparent for medical equipment. Unlike imaging, where most quotes hide behind forms, several anesthesia dealers publish sticker prices, and they cluster tightly: a working GE workstation with a modern vent sits at $9,000-$15,000 almost everywhere. If you are quoted far above that for a similar refurbished unit, ask why.

MRI compatibility carries a clear premium. The Penlon Prima 451 MRI at $18,750 against its conventional sibling at $16,800 shows the roughly 12% surcharge for MRI-safe construction, cheap compared with buying wrong and discovering it in the magnet room.

Vaporizers may not be included. Dealers list Drager Vapor 2000 and D-Vapor vaporizers separately (quote-only); confirm whether your quote includes vaporizers, and for which agents.

Practical advice

  • Ask for the ventilator model and software revision in writing; the vent defines what the machine can do.
  • Budget a biomedical acceptance inspection before first clinical use; dealers refurbish, but your facility certifies.
  • Check agent compatibility: desflurane needs a powered vaporizer (D-Vapor), which is a separate line item.

Reading the model names: what you are actually buying

The GE lineage dominates the refurbished tables, and the names decode simply. Aestiva is the long-serving workhorse generation; its 7900 SmartVent remains the reference ventilator for the class, which is why Aestiva/5 units with that vent hold their $8,995-and-up pricing years after production. Aespire is the compact sibling built for smaller ORs and outpatient centers, sold with either the simpler 7100 vent or the 7900. Avance and the Aisys Carestation sit above both, adding integrated monitoring and electronic gas mixing, which is why Avance starts around $14,500 used while Aisys mostly hides behind request-quote buttons. On the Drager side, Fabius is the compact workhorse family and Apollo the premium workstation; Mindray’s A-series (A5, A7, and the newer A8/A9) undercuts both Western brands new, which is how a re-certified A7 lands at $15,000. For an outpatient surgery center doing routine cases, the honest reading of the table is that the $9,000-$12,000 GE band buys proven capability, and everything above it buys integration, electronics and newer paint.

Ventilator modes: the spec that should drive the choice

Two machines that look identical can differ in what their ventilator can do, and the gap matters clinically. Pressure support (the PSVPro designation in the listings above) is the feature to check first, because spontaneously breathing patients under laryngeal mask anesthesia are routine in outpatient work; the listings make the point themselves, with PSVPro units priced above plain-vent siblings. Pediatric work needs accurate low tidal volumes; bariatric work needs pressure-control modes that the oldest vents lack. The practical rule from the price table: the $2,000-$3,000 step from a basic 7100-vent Aespire to a 7900/PSVPro unit is the best-value upgrade in the market, because it widens the patient population the machine can serve without moving into premium-workstation money.

What a refurbishment should include

“Refurbished” has no legal definition, so the content of the word is the dealer’s process. A credible anesthesia refurbishment includes replacement of the breathing-system consumables (bellows, seals, absorber canister parts), a full leak test and calibration against the manufacturer’s checkout procedure, verification of the oxygen sensor and flow sensors, software checks on electronic machines, and a documented burn-in period. Ask for the checklist the dealer actually ran, the biomedical certification paperwork, and photos of the specific serial number you are buying rather than stock images. The re-certified label on the Mindray A7 and the GE Aespire 7900 in our table implies exactly this paper trail, and the paper is what separates a $12,000 machine you can defend to an inspector from a $7,000 gamble from an auction lot.

The total cost around the machine

Plan the budget around four items beyond the sticker. Vaporizers come first, as noted above: agent-specific, often sold separately, and desflurane’s powered D-Vapor is its own line. Gas supply is second: pipeline connections or cylinder yokes must match your facility, and scavenging for waste gas is a code requirement, not an option. The patient monitor is third, because many refurbished machines ship without one, and integrated-monitor models are priced accordingly. Preventive maintenance is fourth: annual service with calibration is the industry norm, and parts availability is the real difference between brands a decade into ownership, which is where the GE fleet’s enormous installed base quietly pays off. A fair comparison between two quotes prices all four, not just the chassis.

Veterinary and export buyers

Two groups keep the bottom of this market liquid. Veterinary clinics buy human anesthesia machines routinely, often the older Excel and Modulus units that dealers list without prices, because animal use frees them from human-use regulatory burdens; that demand sets a floor under even twenty-year-old machines. Export buyers supply clinics in markets where a $9,000 refurbished GE workstation is the realistic alternative to no machine at all, and dealers accustomed to export will handle the crating and documentation. Both facts help sellers too: a facility retiring a working Aestiva has more exit options than the trade-in offer from its new-equipment vendor.

FAQs

How much does an anesthesia machine cost? Refurbished: about $9,000-$19,000 at dealers with published prices (Nov 2026 listings). New GE/Drager/Mindray workstations: quote-only.

What is the cheapest reliable entry? Refurbished GE Aestiva/Aespire units with the 7900 SmartVent, from $8,995 at the dealers above.

Do prices include vaporizers? Often not; confirm per quote.

Which ventilator feature matters most? Pressure support (PSVPro in GE listings); the $2,000-$3,000 step up to it is the best-value upgrade in the refurbished market.

What should refurbishment paperwork show? The checkout procedure run, replaced breathing-system parts, leak test and calibration results, and biomedical certification for your specific serial number.

Why do ancient machines still sell? Veterinary clinics and export markets buy them steadily, which keeps even twenty-year-old GE units liquid.

See our patient monitor price guide and our ultrasound machine price guide and how we research prices.

Updated November 2026. Sources: Integris Equipment anesthesia listings, SW Medical listings, Quince Medical listing, all checked 21 November 2026. Prices change; confirm with dealers.

Leave a Comment

Your email address will not be published. Required fields are marked *

Scroll to Top