Patient Monitor Price: $695 Refurbished Units to $8,500 OR-Grade Systems (2026)

A patient monitor costs about $700-$900 for a spot-check vital signs unit, $2,300-$5,600 for a multiparameter bedside monitor, and $6,200-$8,500 for ICU and OR-grade systems with gas analysis, based on live dealer listings (Auxo Medical catalog, July 2026). The refurbished market runs far cheaper still: working multiparameter units from $695 to $2,500 at Integris Equipment (checked 21 November 2026). Here is the full price map, what actually drives the gaps, and the consumables math nobody puts in the quote.

💓Patient Monitor Price Tracker
Updated: November 2026
Multiparameter bedside (dealer listings)$2,305–$5,619
Grade / ItemLowHighUnit
Spot-check vitals (Welch Allyn)693866USD
Budget refurbished multiparameter (Integris)6952,500USD
Transport w/ EtCO2 (Dash 5000 / Passport 8)5,1455,995USD
ICU/OR with gas analysis6,1758,498USD
Live listings per Auxo Medical (Jul 2026) and Integris Equipment (Nov 2026). Full scrap price index
Note — This page covers equipment purchase prices for facilities and is not medical advice. Patient monitors are regulated medical devices; biomedical acceptance checks and your jurisdiction’s rules apply before clinical use.

Price by care setting

Class Typical dealer price Examples
Spot-check vital signs (clinic, triage) $693 to $866 Welch Allyn 420 Series $693; Welch Allyn Spot w/ NIBP + Temp $866
Multiparameter bedside $2,305 to $5,619 Philips IntelliVue MP30 $2,304.75; GE Dash 4000 w/ CO2 $4,570.20; GE B40 w/ EtCO2 $5,619
Transport / portable $5,145 to $5,995 GE Dash 5000 w/ EtCO2 $5,145; Mindray Passport 8 w/ EtCO2 $5,995
ICU / OR high-acuity $6,175 to $8,498 GE CARESCAPE B850 $6,175; GE B40 with 5-agent analysis $8,498
Capnography devices / modules $1,295 to $2,795 Respironics CO2 module $1,295; Medtronic Capnostream 20p $2,795

Source: Auxo Medical catalog listings accompanying its July 2026 care-setting guide. Mostly refurbished dealer stock; conditions vary by listing.

The budget refurbished tier

Monitor Condition Price
Mindray Accutorr V (vitals) Refurbished $695
Welch Allyn Spot Vital Signs LXi Refurbished from $719.97
Datascope Passport 2 (ECG, Masimo SpO2, NIBP, printer) Refurbished $1,195
GE Datex-Ohmeda E-PRESTN multi-module Refurbished $1,295
Datex-Ohmeda Cardiocap 5 Refurbished from $1,495
Datascope / Mindray Passport V Refurbished $1,595
Mindray DPM4 Refurbished $1,895
Mindray Spectrum w/ EtCO2 Refurbished from $2,250
Criticare VitalCare 506DNP3 New $2,500

Source: Integris Equipment patient monitor listings, checked 21 November 2026. The same dealer lists many older Datascope and GE DINAMAP units at unlisted “too low to show” prices, which in practice means: call and negotiate.

What actually drives the price

Patient monitors are priced by parameters, and the ladder is consistent across brands. The floor is NIBP (the blood-pressure cuff), SpO2 and temperature, which is the spot-check class. Adding multi-lead ECG with arrhythmia detection moves a unit into the multiparameter class. Invasive blood pressure channels (IBP) and cardiac output push toward the acuity tiers. The two parameters that move price most are visible in the tables: EtCO2 capnography, which adds $1,300-$2,800 of module value and is why “w/ EtCO2” units cluster at the top of each class, and anesthetic agent analysis, which is the gap between the $6,175 CARESCAPE B850 and the $8,498 five-agent B40. Screen size, touch interfaces and battery capacity matter less than buyers expect; the sensing modules are the money.

The second quiet price driver is the SpO2 technology inside. Masimo and Nellcor dominate, the listing for the Passport 2 advertises its Masimo SpO2 for a reason, and the choice locks you into that ecosystem’s sensors for the monitor’s life. Reusable sensors cost real money and disposables compound forever, so two identical-looking monitors with different SpO2 licenses have different lifetime costs. Ask which SpO2 is fitted, whether your existing sensor stock is compatible, and price a replacement sensor set with the quote.

Networking: the hospital-grade difference

A standalone monitor shows numbers at the bedside; a networked fleet feeds a central station, posts alarms to the nurses’ desk and archives trends into the record. That capability, the CARESCAPE and IntelliVue platforms’ real selling point, is also why hospital-tier systems cost what they do and why their quotes grow central-station licenses, telemetry transmitters and installation services. The honest advice for clinics and surgery centers: if nobody will ever watch a central screen, do not pay for the ecosystem. A standalone B40 or Passport-class unit at the prices above covers a recovery bay completely, and the budget tier’s $695-$1,895 units cover pre-op holding and procedure rooms where continuous multiparameter data is a comfort rather than a requirement.

The consumables and ownership math

Monitors are cheap to run compared with imaging, but not free. Budget lines: SpO2 sensors (reusable ones fail from cable flex; disposables recur per patient), NIBP cuffs in several sizes, ECG lead sets, EtCO2 sampling lines and water traps for sidestream units, and batteries, which are consumable on transport monitors and should be load-tested on any refurbished purchase. Preventive maintenance is an annual biomedical check rather than an OEM contract for most standalone units, which is part of why this class of equipment refurbishes so well. On a $1,200 refurbished Passport 2, a sensible first order adds a spare sensor, cuffs and a battery, perhaps $200-$400 of accessories, and the machine then runs for years; that total cost of entry is still a fraction of one new bedside monitor.

Refurbished buying checklist

Four questions sort the dealers from the resellers. First, does every parameter pass a documented functional test, NIBP against a simulator, SpO2 against a tester, ECG with a patient simulator? Second, what is the battery’s tested capacity, not its age? Third, which SpO2 and EtCO2 technologies are fitted and licensed? Fourth, what warranty covers the unit, and does it include the modules? The anesthesia-market rule applies here too: a dealer who answers in writing within a day is the dealer to use, and at these price points the premium for a documented unit over an auction gamble is usually under two hundred dollars, the cheapest insurance in medical equipment.

Our analysis

This is the most buyer-friendly corner of the medical equipment market. Published prices, deep refurbished stock, standard consumables and minimal regulatory overhead make patient monitors behave almost like IT hardware. The spread between a $695 Accutorr and an $8,498 five-agent OR monitor is not brand mystique; it is a countable stack of sensing modules, which makes quotes genuinely comparable once you list parameters side by side.

EtCO2 is the decision that deserves thought. Capnography’s $1,300-$2,800 premium is unavoidable where sedation is performed, and standards increasingly expect it; buying a monitor without EtCO2 for a sedation room, then bolting on a $2,795 Capnostream later, costs more than buying it integrated. Map the parameter list to what each room actually does before ordering anything.

Practical advice

  • List required parameters per room (NIBP/SpO2/temp; +ECG; +EtCO2; +IBP/agents) and quote against that list, not against model names.
  • Standardize on one SpO2 ecosystem across the facility; mixed Masimo and Nellcor fleets double sensor inventory.
  • On refurbished units, demand functional test documentation and a load-tested battery; both fit in an email and predict everything else about the dealer.

FAQs

How much does a patient monitor cost? Spot-check vitals $693-$866; multiparameter bedside $2,305-$5,619; transport $5,145-$5,995; ICU/OR with gas analysis $6,175-$8,498 (dealer listings, Jul-Nov 2026). Budget refurbished multiparameter units run $695-$2,500.

What makes one monitor $5,000 more than another? Parameters: EtCO2 adds $1,300-$2,800 in module value and anesthetic agent analysis adds more; the sensing modules, not the screen, are the money.

Are refurbished monitors reliable? This class refurbishes unusually well; insist on documented functional tests per parameter and a load-tested battery.

Do I need a central station? Only if someone will watch it; standalone units fully cover clinics, surgery centers and recovery bays at a fraction of networked-fleet cost.

What consumables should I budget? SpO2 sensors, NIBP cuffs, ECG leads, EtCO2 sampling lines and batteries; roughly $200-$400 of accessories alongside a budget refurbished unit is a sensible first order.

Why does the SpO2 brand matter? Masimo and Nellcor sensors are ecosystem purchases; the fitted technology decides your sensor costs for the monitor’s life.

See our anesthesia machine price guide, our ultrasound machine price guide, and how we research prices.

Updated November 2026. Sources: Auxo Medical care-setting guide and catalog (30 July 2026), Integris Equipment patient monitor listings (checked 21 November 2026). Prices change; confirm with dealers.

Leave a Comment

Your email address will not be published. Required fields are marked *

Scroll to Top