Scissor Lift Price: $6,900 Used Workhorses to $62,000 New 40-Footers (2026)

A new electric scissor lift costs $22,500-$30,000 in the 19 ft class, $32,000-$38,000 at 26 ft, $40,000-$48,000 at 32 ft and $52,000-$62,000 at 40 ft (WinWin Equipment price guide, updated 18 November 2026). The used market runs far below: live inventory prices the workhorse Genie GS-1930 at $7,900-$10,500 and its Skyjack SJIII 3219 rival at $6,900-$11,000, with refurbished-tier units from $8,500. Rough-terrain diesel models typically run 1.8-2.2x the equivalent electric (GS Equipment guide, 2026).

🏗️Scissor Lift Price Tracker
Updated: MSRP guide 18 Nov 2026; dealer listings 18-22 Nov 2026
New 19 ft electric slab (MSRP)$22,500-30,000
Grade / ItemLowHighUnit
New 26 ft electric (MSRP)3200038000USD
New 32 ft electric (MSRP)4000048000USD
New 40 ft electric (MSRP)5200062000USD
Used Genie GS-1930 (19 ft)790010500USD, inventory
Used Skyjack SJIII 3219 (19 ft)690011000USD, inventory
WinWin Equipment MSRP guide (18 Nov 2026), live dealer inventory, Zuma Sales listings. Full scrap price index

New prices by platform height

Class (platform height) New MSRP range Typical working height
19 ft electric slab $22,500 to $30,000 ~25 ft
26 ft electric slab $32,000 to $38,000 ~32 ft
32 ft electric slab $40,000 to $48,000 ~38 ft
40 ft electric slab $52,000 to $62,000 ~46 ft
Rough-terrain diesel (26-40 ft) roughly 1.8-2.2x the equivalent electric per class

New MSRPs per WinWin Equipment (18 November 2026); the rough-terrain multiple per GS Equipment’s 2026 guide, which also notes pricing across Genie, Skyjack and JLG is “remarkably consistent” within a size class, usually within a few thousand dollars.

Used market: live inventory by model

Model (years in stock) Class Inventory price range
Skyjack SJIII 3219 (2015-2021) 19 ft $6,900 to $11,000
Genie GS-1930 (2015-2019) 19 ft $7,900 to $10,500
Skyjack SJIII 3226 (2014-2019) 26 ft $7,500 to $13,000
Genie GS-2632 (2012-2019) 26 ft $7,800 to $12,000
Skyjack SJIII 4632 (2016-2018) 32 ft $15,000 to $16,500
Genie GS-3246 / GS-3232 (2015-2021) 32 ft $15,500 to $25,950
Skyjack SJIII 4740 (2016-2018) 40 ft $16,900 to $18,900
Genie GS-4047 (2017-2019) 40 ft $17,900 to $18,400

Live dealer inventory, 18 November 2026. The same dealer prices its tiers transparently: “fully serviced” units from $7,000 (19 ft) to $15,500 (40 ft), and “fully refurbished” with a new battery pack from $8,500 to $17,000, a $1,500 gap that is effectively the battery and cosmetics priced separately.

Dealer street prices against the MSRP guide

A second dealer’s posted prices, checked 22 November 2026, show how far below guide MSRP real new-machine transactions can land: a new JLG ES1932 (19 ft) listed at $14,900 against a $16,400 regular price, and a new JLG ES2632 (26 ft) at $21,100 against $22,500, both well under the $22,500-30,000 and $32,000-38,000 MSRP bands above. The same page listed used 2018-2019 Genie GS-1930s with 196-298 hours at $7,900, matching the bottom of the live-inventory range in our used table, and rental at $150-250 a day, $400-700 a week and $900-1,800 a month for electric units. Nine of its fourteen new lifts said call for price, so the posted numbers are a small sample, but they set a useful rule: treat MSRP as the ceiling and ask any dealer to quote against street listings.

Machine (new) Dealer listed Dealer “regular”
JLG ES1932 (19 ft electric) $14,900 $16,400
JLG ES2632 (26 ft electric) $21,100 $22,500

Zuma Sales electric scissor lift listings and cost guide, checked 22 November 2026; monthly finance quotes on the same page were $280 (ES1932) and $399 (ES2632) on approved credit.

What drives a used lift’s price

GS Equipment’s list of value drivers matches what the inventory table shows: hours first, with sub-1,000-hour machines commanding premiums and the 3-5-year-old, 1,200-2,500-hour sweet spot retaining 60-70% of service life; battery condition second, because a tired 24V pack is the expensive consumable, which is why refurbished tiers advertise new flooded lead-acid packs; tires and deck condition third; and ANSI inspection status last but far from least, since a current inspection is paperwork a working lift must carry anyway. Brand barely matters at equal condition: Genie and Skyjack start at identical refurbished prices in every class on the dealer’s own tier sheet, so chase hours and battery, not badges.

Electric slab or rough terrain

The 1.8-2.2x rough-terrain multiple buys diesel power, four-wheel drive, outriggers and bigger decks for outdoor ground, and the decision is the jobsite, not preference. Indoor trades on slab, warehousing, facilities maintenance, live in electric scissors, which run quiet and emission-free. Construction exteriors and yards need RT or they need ground protection and good weather. The in-between answer many contractors reach: own the electric that works every week, rent the RT for the occasional outdoor phase, and let the rental market carry the diesel’s depreciation.

Rent or buy: the 4-5 month rule

GS Equipment’s stated threshold, ownership wins past 4-5 months of use per year, is the right frame, and our scissor lift rental cost guide holds the daily, weekly and monthly rates to run your own math against. At typical monthly rental rates, a contractor using a 19 ft lift half the year pays rental totals that approach a used machine’s entire price in the first year; a 90-day project should rent without a second thought. Ownership adds the quiet costs rentals hide: annual inspections, battery replacement eventually, and transport between sites, which is a trailer question for slab scissors rather than the flatbed logistics that bigger heavy equipment demands.

Specs beyond height that move the price

Within a height class, four specifications separate the cheap end of a band from the expensive one. Platform capacity first: standard 19-footers carry around 500 lb, and higher-capacity variants that take two workers plus material command premiums, so match the rating to your crew-plus-load reality rather than assuming. Deck extension second: roll-out extensions add reach over obstacles and show up in the model codes (the 46-inch-wide, extension-equipped units sit above narrow-deck siblings). Width third: narrow 32-inch-class machines that pass standard doorways cost more than their footprint suggests because indoor trades need exactly that. Drive and power fourth: newer AC electric drive systems run longer per charge and cost more than older DC units, and lithium packs are beginning to appear at the top of the market the same way they have in forklifts. None of these change the class bands above, but they explain why two 26-footers from the same year sit $4,000 apart in the inventory table.

Financing and the paperwork

Dealers in this market finance routinely at 36-60 months, and used lifts from the big brands are standard collateral, which keeps entry costs manageable for small contractors: the arithmetic on an $8,500 refurbished 19-footer over 48 months is a monthly payment comparable to a few rental days. The paperwork that follows the machine matters as much as the loan: the ANSI inspection record, the operator manuals the standard requires to live on the machine, and familiarization for operators. Jobsite general contractors increasingly ask for all three before a lift goes through the gate, so a seller who hands over a machine with complete documentation has delivered real value that a bare auction unit lacks, and the price difference between those two machines is usually smaller than the first compliance delay it prevents.

Our analysis

The 19-26 ft used tier is one of the best value pockets in equipment. At $6,900-$13,000 for inspected, working lifts from the two dominant brands, with new batteries available for roughly $1,500 more at the refurbished tier, the entry cost of owned access equipment is lower than almost any machine of comparable workplace value, which is exactly why fleets churn them and supply stays deep.

The dealer’s own tier pricing is a gift to negotiators. When a seller publishes “serviced” versus “refurbished” prices $1,500 apart, it has told you what it thinks a battery pack and cosmetics are worth; use that spread when evaluating any private-sale lift with an unknown battery.

Practical advice

  • Buy by hours and battery test, not year; a low-hour 2015 beats a hard-run 2019.
  • Check the ANSI inspection date and demand the decal’s paperwork.
  • Measure your doorways and elevator if the lift must travel inside buildings; 19 ft units fit standard doors, bigger classes may not.
  • Price delivery: used lifts are quoted FOB the yard, and transport is on you.

FAQs

How much does a scissor lift cost? New electric: $22,500-$62,000 from 19 to 40 ft. Used: $6,900-$25,950 across the same classes in live inventory (18 Nov 2026). Rough-terrain diesel runs 1.8-2.2x electric.

What does a used 19 ft lift cost? $6,900-$11,000 in current inventory for Genie GS-1930 and Skyjack SJIII 3219 units from the mid-2010s.

Genie, Skyjack or JLG? Within a class their pricing is nearly identical; condition, hours and battery decide value, not the badge.

When does buying beat renting? Past roughly 4-5 months of use per year; under 90 days, rent.

What is the expensive consumable? The battery pack; refurbished tiers price a new one at roughly $1,500 over serviced units.

Do these need inspections? Yes; ANSI inspection status is a value driver and a compliance requirement on jobsites.

See our scissor lift rental guide, our boom lift price guide, our forklift price guide, our heavy equipment cost guide, and our pallet jack guide and how we research prices.

Updated November 2026. Sources: Zuma Sales listings (22 Nov 2026), WinWin Equipment price guide and live inventory (updated 18 November 2026), GS Equipment 2026 price guide. Prices change; confirm with dealers.

Leave a Comment

Your email address will not be published. Required fields are marked *

Scroll to Top