A used boom lift costs $17,000-$60,000 for most 45-60 ft articulating models and $25,000-$70,000 for telescopic booms up to 86 ft, based on FleetNow’s marketplace asking prices refreshed in late October and early November 2026. New anchors from the same data: a 2025 Genie Z-45/25J DC listed at $65,850 and a 2025 Z-45 XC at $84,850. Giant platforms climb steeply: used JLG 1350SJP units (135 ft) run $93,800-$179,900 and Genie ZX-135/70 listings reach $249,900.
| Grade / Item | Low | High | Unit |
|---|---|---|---|
| New 2025 Genie Z-45/25J DC | 65850 | 65850 | USD listed |
| Used Genie S-60/S-65 (60-66 ft) | 25000 | 47000 | USD typical |
| Used Genie S-80/S-85 (80-86 ft) | 36000 | 70000 | USD typical |
| Used JLG 1350SJP (135 ft) | 93800 | 179900 | USD |
| Rental 40-60 ft | 350 | 700 | USD/day |
Articulating booms: Genie Z-series used prices
| Model | Class | Full listing range | Typical (middle half) |
|---|---|---|---|
| Genie Z-45/25J | 45 ft, engine-powered | $17,000 to $49,900 | $23,900 to $33,800 |
| Genie Z-45/25J DC | 45 ft, electric | $15,900 to $69,850 | $29,900 to $50,000 |
| Genie Z-45 XC | 45 ft, high capacity | $47,900 to $91,850 | $49,600 to $84,850 |
| Genie Z-60/34 | 60 ft | $18,000 to $54,900 | $28,700 to $35,000 |
| Genie Z-60/37 FE | 60 ft, hybrid | $47,100 to $85,300 | $52,700 to $55,900 |
| Genie Z-62/40 | 62 ft | $31,850 to $127,550 | $42,500 to $55,500 |
| Genie Z-80/60 | 80 ft | $26,000 to $161,850 | $39,100 to $60,800 |
| Genie ZX-135/70 | 135 ft | $85,000 to $249,900 | few listings |
FleetNow marketplace asking prices, updated 29 October 2026; ranges span model years and hours, and the “middle half” column is the realistic negotiating zone. New-unit anchors from the same listings: 2025 Z-45/25J DC at $65,850, 2025 Z-45 XC at $84,850.
Telescopic booms: Genie S and JLG S-series used prices
| Model | Platform height | Typical used range |
|---|---|---|
| JLG 400S | 40 ft | $25,300 to $38,100 |
| Genie S-45 | 45 ft | $26,200 to $31,400 |
| JLG 460SJ | 46 ft | $25,900 to $44,900 |
| Genie S-60/S-65 | 60-66 ft | $25,000 to $47,000 |
| JLG 600S / 660SJ | 60-66 ft | $25,500 to $46,900 |
| Genie S-80/S-85 | 80-86 ft | $36,000 to $70,000 |
| JLG 800S / 860SJ | 80-86 ft | $36,300 to $69,900 |
| JLG 1200SJP | 120 ft | $80,000 to $110,000 |
| JLG 1350SJP | 135 ft | $93,800 to $179,900 |
FleetNow asking prices, updated 3 November 2026. Note how tightly Genie and JLG track each other class for class, the same brand-parity we found in scissor lifts.
Articulating or telescopic
The two families solve different reach problems. Telescopic (“stick”) booms extend straight, deliver the most height and horizontal outreach per dollar, and rule steel erection, glazing and anything with clear sight lines to the work. Articulating (“knuckle”) booms bend around obstacles, their jib wrists into awkward positions, and they dominate maintenance, refinery and under-bridge work where the path to the task is not a straight line. The price data shows the trade: at 60 ft, typical used telescopics ($25,000-$47,000) and articulating Z-60s ($28,700-$35,000) cost about the same, so the choice is geometry, not budget. Electric and hybrid variants are the real premium: the Z-45 DC’s typical band runs $6,000-$16,000 over its engine sibling, and the hybrid Z-60/37 FE’s $52,700-$55,900 against the diesel Z-60/34’s $28,700-$35,000 is the clearest electrification premium we have measured anywhere on this site, paid by indoor-and-out fleets that need one machine for both worlds.
Reading a used boom listing
The giant ranges in the first table ($26,000 to $161,850 for one model) are the used-boom market in a sentence: model year and hours dominate value. Pre-2015 units with 4,000+ hours populate the bottom of every band, late-model low-hour machines the top, and the middle half column is where clean, inspection-current, mid-hours machines actually trade. The checklist mirrors scissor lifts, scaled up: ANSI inspection status, boom wear pads and pins (play in the boom is expensive), swing bearing condition, engine hours against service records on diesel units, battery test on DC models, and tires, since filled-foam replacements on an 80-footer cost four figures. Transport is the other scale-up: booms travel on flatbeds or equipment trailers with real weight, so FOB yard pricing plus freight is the true comparison basis, exactly as with the rest of the heavy equipment market.
Ownership costs at boom scale
Booms cost more to keep than scissors in every line. Annual ANSI inspections are more involved on articulated structures; engines on diesel units bring the full service calendar scissors avoid; tires are a four-figure corner on big chassis; and insurance treats a 135-foot platform as the liability it is. Fuel is real money on telescopics that idle all day at altitude, which is part of the electric tier’s pitch beyond emissions. The budgeting rule from fleet practice: set aside a meaningful share of the purchase price annually for a working boom’s upkeep, more for high-hours diesels, and let any machine’s maintenance file argue its price. A $30,000 boom with gap-free records is routinely the better buy than a $24,000 mystery, because the first structural repair erases the saving.
Rental rates by height, and more dealer listings
| Size class | Daily | Weekly | Monthly |
|---|---|---|---|
| 30-40 ft | $200-400 | $550-1,100 | $1,200-2,500 |
| 40-60 ft | $350-700 | $900-1,800 | $2,000-3,800 |
| 60-120 ft | $600-1,500 | $1,500-4,000 | $3,500-8,000 |
| 120-180 ft | $1,500-5,000+ | $4,000-12,000+ | $8,000-20,000+ |
DOZR rental guide dated March 2026; it puts articulating rentals 10-20% above telescopic at equal height and electric 15-25% below diesel, and estimates owning a 60 ft unit at $2,500-4,500 a month with loan, insurance and maintenance. The same page gives two different national daily averages ($580 and $696), so we use its ranges only.
Dealer listings checked 22 November 2026 fit the FleetNow bands above: a 2014 Genie S-40 with 2,798 hours at $19,990, a 2016 JLG 460SJ with 3,416 hours at $21,500, a 2015 JLG 600A at $44,950, a 2016 Genie S65 at $50,950, a 2017 Genie Z-80/60 with 2,940 hours at $59,700, and a 2015 Genie S-125 with 2,386 hours at $97,700. The ownership estimate for a 60-footer sits almost on top of the 40-60 ft monthly rental band, which is why continuous need prices renting and owning about the same, and horizon, not rate cards, decides.
Where the deals come from
The used boom market is fed by rental fleets, which cycle machines out on schedule at 5-8 years regardless of condition, and that provenance cuts both ways: rental units carry high hours and hard lives, but also factory-scheduled maintenance and complete records. Auction channels price lower still, with as-is risk attached. The marketplace asking prices in our tables sit between those worlds, and the honest sequence for a buyer is the one the data suggests: shortlist by model and the middle-half band, demand records and inspection status, then price the specific machine’s hours and condition against where the band says it should sit. Sellers know these same numbers, so bids far below the band waste everyone’s time unless the machine’s file justifies them.
Our analysis
Height is cheap until 90 feet, then it is not. From 40 to 86 feet, typical used prices climb gently ($25,000 to $70,000), but the step to 120-135 ft machines triples the money ($80,000-$179,900). The engineering reason is structural: ultra-boom chassis, axles and counterweights belong to a different class. The buying lesson: if your work tops out at 85 feet, the 80-86 ft class is the value ceiling, and the occasional taller job rents.
The electrification premium is now measurable. Side-by-side Genie listings put electric and hybrid 45-60 ft booms $15,000-$25,000 over engine equivalents in typical trade. Fleets with indoor or emissions-ruled work pay it; general contractors mostly should not, yet, and the used diesel market’s depth is their reward.
Practical advice
- Negotiate inside the middle-half band for the model and year, not against the full listing range.
- Check boom pins, wear pads and swing bearing before hours; structure costs more than engines.
- Demand the ANSI inspection record; jobsites will.
- Price freight from the seller’s yard into every comparison, and battery tests on any DC unit.
FAQs
How much does a boom lift cost? Used 45-60 ft: typically $23,900-$55,900 depending on type and power. Used 80-86 ft: $36,000-$70,000. Giants (120-135 ft): $80,000-$179,900. New 45 ft Genie units listed at $65,850-$84,850 (FleetNow, Oct-Nov 2026).
Articulating or telescopic? Same money at the same height; choose by geometry: knuckles go around obstacles, sticks go farthest straight.
What do electric boom lifts cost extra? Typically $15,000-$25,000 over engine equivalents in the 45-60 ft classes, per side-by-side Genie listings.
Genie or JLG? Class-for-class their used pricing tracks within a few thousand dollars; buy condition and hours, not the badge.
Why do listing ranges span 6x? Model year and hours; the middle-half figures are where clean machines actually trade.
Buy or rent tall booms? Own your everyday height class; rent the occasional 120 ft+ job, because the giant tier triples the capital.
Where do used booms come from? Mostly rental-fleet cycling at 5-8 years: high hours but factory maintenance records; auction units price lower with as-is risk.
What should annual upkeep budget look like? A meaningful share of purchase price, more for high-hours diesels; inspections, tires, engine service and insurance all scale with the machine.
See our scissor lift price guide, our forklift price guide, our heavy equipment cost guide, and our telehandler price guide and how we research prices.
Updated November 2026. Sources: DOZR rental guide (Mar 2026), Lifts Today, My Little Salesman (22 Nov 2026), FleetNow Genie articulating boom guide (updated 29 October 2026), FleetNow telescopic boom guide (updated 3 November 2026). Asking prices, not sold prices; ranges shift with listings, so check live inventory.


