An engine hoist costs $529-$661 for 2-ton folding shop cranes from value brands, $1,249-$1,615 for the same rating from Black Hawk and OTC, and $10,375 for OTC’s professional 1819 fold-away crane, which lifts less, 2,200 pounds, but lifts it to a 117-inch boom height built for truck and industrial work, per one dealer’s listings checked 21 November 2026. That inversion, six times the price for half the nominal capacity, is the category’s honest lesson: the ton rating is the least informative number on the page.
| Grade / Item | Low | High | Unit |
|---|---|---|---|
| Value 2-ton folding cranes (GI / Vestil) | 529 | 661 | USD |
| Premium 2-ton (Black Hawk / OTC Stinger) | 1,249 | 1,615 | USD |
| Professional 117\" boom class (OTC 1819) | 10,375 | 10,375 | USD |
The ladder at one dealer
| Machine | Rating | Price |
|---|---|---|
| Global Industrial folding floor crane | 4,000 lb retracted / 1,000 lb extended | $529 |
| Vestil shop crane, telescopic legs | 2 ton (table below) | $661 |
| Black Hawk BH8026 folding | 2 ton | $1,249 |
| OTC Stinger folding | 2 ton, 25-46″ reach | $1,615 |
| OTC 1819 fold-away (ANSI-PALD) | 2,200 lb, 117″ boom height | $10,375 |
Global Industrial listings, checked 21 November 2026. The Black Hawk listed as out of stock at its price; the others in stock.
Capacity is a curve, not a number
The Vestil’s own capacity table is the specification every buyer should internalize: 4,000 pounds at 49 inches of reach, 3,000 at 58, 2,000 at 67, and 1,000 at 76. Every telescoping-boom crane works this way, the extended boom trading capacity for reach exactly like the forklift load centers and boom-lift charts in our access-equipment guides, and the “2-ton” in the product name describes the boom at its shortest. The practical translation: an engine pulled from deep in an engine bay is hanging at the long end of the curve, which is why experienced builders size hoists by capacity at working reach, not by the headline ton, and why the $529 crane and the $1,615 crane, identical on the headline, can be very different machines over an actual fender.
What the 3x inside the 2-ton class buys
From $529 to $1,615 at the same nominal rating, the money buys steel, geometry and provenance: heavier-gauge booms and legs that flex less at load, leg spreads and wheel quality that steer a hanging engine without fighting, hydraulic rams with service parts behind them, and a brand’s liability-grade testing. The fold-away feature, near-universal in home shops where the crane lives in a corner, costs rigidity on the cheapest frames, which is part of what the premium units repair. As with the drill presses and band saws earlier in this series, weight is the honest proxy, the OTC Stinger’s 276 pounds against lighter value frames, and the buyer’s question is utilization: an engine a year tolerates the value tier, a shop pulling drivetrains weekly should not.
The $10,375 outlier: when reach is the product
OTC’s 1819 lifts 2,200 pounds, less than anything else in the table, to a 117-inch boom height, and costs six times the premium 2-ton crane. The price is the reach, the ANSI-PALD compliance, and the 497-pound professional build: this is a machine for pulling engines over truck grilles, setting components onto elevated equipment, and working all day in fleet and industrial shops where a dropped load is a career event. It is the same pattern as our ironworker and shear guides, where the tier above buys duty rather than capacity, taken to its extreme: past the hobby tiers, what professional equipment sells is the guarantee, in steel and paperwork, that the worst day stays boring.
Load leveler, stand and the rest of the pull
The hoist is half the engine-pull kit. A load leveler, the screw-adjusted cradle between hook and chains, tilts the engine to the angle the bay demands and costs little; an engine stand receives the engine after the pull, and skipping it means an engine on a pallet, which everyone does once; chains or a lifting plate rated for the job complete the set. Shops doing machine work will roll the engine from stand to the resurfacing and head equipment our engine-machinery guide prices, and a parts washer meets everything that comes off it. Budget the accessories at a tenth of the hoist and the workflow stops improvising.
Who buys which tier, and the used market
n
The value tier serves home builders, restorers and farm shops where the crane works a weekend a year and folds away for the rest; the premium 2-ton tier serves repair shops and serious builders whose crane earns weekly; the tall professional class belongs to fleet garages, equipment dealers and industrial maintenance, bought against liability and insurance requirements as much as against workload. Used engine hoists are everywhere and cheap, estate sales, auction lots and shop closures shed them constantly, and the pre-purchase inspection is mercifully short: the ram holds under load without drifting, boom pins un-ovaled, legs straight, welds uncracked. A drifting ram is a seal kit on a name-brand crane and a disposal problem on an orphan, which is the whole brand premium restated in one repair. The one used purchase to decline is a bent boom at any price, because steel that has yielded once has announced its opinion of the next load, and no discount repeals it. Everything else on a hoist is replaceable hardware; the boom is the machine.
Our analysis
Buy capacity at reach, not the ton on the box. The published curve runs 4,000 pounds at 49 inches down to 1,000 at 76; real engine pulls live at the long end, and the headline rating describes the short end, which makes the capacity table the only spec worth comparing between brands.
The class premiums price duty, and the outlier proves it. 3x inside the 2-ton class buys steel and provenance; 6x for the 117-inch professional machine buys reach and compliance at lower capacity. Nominal tonnage explains almost none of the price variance in this category.
Practical advice
- Check the capacity-at-reach table against your actual engine and bay before comparing prices.
- Between lookalikes, the heavier frame is the better crane; weight is the honest spec.
- Occasional pulls: the value tier is rational. Weekly drivetrain work: buy the duty tier.
- Budget leveler, stand and rated chains with the hoist; the accessories are a tenth of the price and half the safety.
- Truck, RV or elevated work is the tall professional tier’s territory; don’t extend a short boom’s luck.
FAQs
How much does an engine hoist cost? $529-$661 for value 2-ton folding cranes, $1,249-$1,615 for premium-brand 2-ton units, $10,375 for the professional 117-inch-boom class (one dealer, 21 Nov 2026).
What does “2-ton” actually mean? Capacity with the boom retracted; the published curve falls to 1,000 lb at full 76-inch reach, where real engine pulls often happen.
Why does a 2,200 lb crane cost $10,375? Reach and duty: a 117-inch boom, ANSI-PALD compliance and a professional build for truck and industrial work; capacity was never the product.
Is a $529 hoist safe? Within its curve and for occasional use, yes; respect the reach derating, inspect the ram, and lift nothing you wouldn’t stand beside.
What else do I need? A load leveler, an engine stand and rated chains or a lifting plate; about a tenth of the hoist’s price, and the difference between a pull and an improvisation.
Hoist or gantry? The folding floor crane wins in bays and tight shops; fixed gantry cranes win for repeated straight lifts at one station, a different purchase for a different workflow.
See our forklift guide, our cylinder head equipment guide, our parts washer guide, and how we research prices.
Updated November 2026. Sources: Global Industrial folding floor crane, Vestil 2-ton shop crane, Black Hawk BH8026, OTC Stinger and OTC 1819 listings, all checked 21 November 2026. Respect capacity-at-reach ratings.


