CNC Hydraulic Press Brake Machine Price (2026): New, Chinese Export and Used, With a Tonnage Check

A new small CNC hydraulic press brake from a US supplier costs about $28,279 (Baileigh BP-3305CNC, 33 tons, 63 inches), while a Chinese manufacturer quotes export prices of $22,000 to $40,000 for 80 to 125-ton CNC hydraulic machines. Used 100-ton CNC brakes in the US are listed around $49,500. Prices checked 14 November 2026.

⚙CNC Press Brake Price Tracker
Updated: November 2026
Baileigh BP-3305CNC, 33 t, new (US)$28,279
Grade / ItemLowHighUnit
Small CNC brake, 33 t x 63 in, new (US dealer)28,278.9528,278.95USD
Chinese CNC hydraulic, 80-125 t (maker export range)22,00040,000USD
Chinese CNC hydraulic, 160-220 t (maker export range)30,00055,000USD
Servo-electric press brake (maker export range)50,000150,000USD
Used 100 t x 10 ft CNC, 2000 Accurpress (US)49,50049,500USD
Used 33 t CNC, 2021 Baileigh (US, sold)15,90015,900USD
Dealer, used-listing and manufacturer export prices on the date shown; freight, duty, tooling and installation may be extra. Full press brake guide

What sets the price of a press brake

  • Tonnage and bed length: the two numbers in every model name. A 100-ton, 10-foot brake can bend thicker or longer parts than a 33-ton, 63-inch one, and costs more to build and ship.
  • Control and axes: NC machines set the ram depth and back gauge simply; CNC machines program the bend sequence and calculate angles. More back-gauge axes (X, R, Z1, Z2) let the gauge move in more directions for complex parts.
  • Drive: conventional hydraulic, servo-electric and hybrid (servo-driven hydraulic pumps) machines, in rising order of price.
  • Crowning: manual or motorised crowning compensates for bed and ram deflection so long bends stay straight.
  • Safety and tooling: light curtains or laser guarding and the starter punch and die set can add significantly to the price, or be included.

New press brake prices

Machine Source Price
Baileigh BP-3305CNC: 33 tons, 63 in x 7 in table, 2-axis Estun E21 CNC, 220V three phase, 7.5 hp, light curtains, gooseneck punch and 4-way multi-V die, 1-year parts warranty Penn Tool Co (US dealer) $28,278.95 + $595 shipping
New 2026 Turkish 100-ton x 2,600 mm CNC brake with ESA S830 control (3-4 axes) Machineseeker listing, Istanbul Price on request

Chinese export price ranges (manufacturer’s own figures)

DurmaPress, a Chinese press brake maker, publishes these 2026 export ranges in US dollars. They are a seller’s own figures, not independent market data, and typically cover the machine before freight, duty and installation.

Type or tonnage Export price range (USD)
Manual press brake $3,000 – $15,000
NC press brake $8,000 – $25,000
CNC hydraulic press brake $20,000 – $95,000+
CNC hydraulic, 40-63 tons $16,500 – $25,000
CNC hydraulic, 80-125 tons $22,000 – $40,000
CNC hydraulic, 160-220 tons $30,000 – $55,000
CNC hydraulic, 250-400 tons $45,000 – $80,000
Servo-electric press brake $50,000 – $150,000+
Hybrid press brake $60,000 – $170,000+
Robotic press brake cell $150,000 – $500,000+

DurmaPress 2026 price guide, checked 14 November 2026. The same guide says longer beds add roughly 10-15% at 3,000 mm, 25-35% at 4,000 mm and 50-70% at 6,000 mm over a 2,500 mm base.

Used CNC press brake prices (US)

Machine Year Seller Asking price
Accurpress 710010, 100 tons x 10 ft, ETS 100 / ETS 3000 CNC, 2-axis back gauge 2000 Equipment Hub, Decatur, Georgia (demo on request) $49,500
Baileigh BP-3305CNC, 33 tons, 63 in 2021 Surplus Record listing, recently sold $15,900
Baykal APHS 3104×90, 100 tons, 4-axis, ESA 630 CNC, motorised crowning 2013 Machine Tool Technologies, Milwaukee Request quote

How to check the tonnage you need

The Fabricator, a US metal-forming trade magazine, gives the standard air-bending formula: tons per inch = [(575 × thickness²) / die width] / 12 × material factor, then multiply by the bend length in inches. The 575 constant is based on 60,000 psi tensile cold-rolled steel (material factor 1); 6061-T6 aluminium is 1.28, 5052-H32 aluminium 0.50 and 304 stainless 1.4 or more.

Worked example (our calculation): 10-gauge mild steel (0.135 in) in a 1-inch die needs [(575 × 0.018225) / 1] / 12 = 0.87 tons per inch. A full 10-foot (120-inch) bend therefore needs about 105 tons, slightly more than a 100-ton brake can deliver. With a 1.25-inch die the requirement falls to about 84 tons. This is why brakes are bought with a margin, and why the die opening is part of the tonnage decision, not an afterthought.

The same magazine also warns against concentrating full tonnage over a short length. Its example takes 60% of the distance between side frames as the safe working length: a 250-ton brake with 14 feet between frames gives 8.4 feet, or about 30 tons per foot. Ask the maker for the machine’s own centre-load limit.

Our analysis

The most telling comparison is between the used US market and new Chinese machines. A 24-year-old 100-ton Accurpress is listed at $49,500, more than the top of DurmaPress’s own range for a new 80 to 125-ton CNC hydraulic brake ($22,000 to $40,000). Buyers pay that premium for a machine they can see running, collect quickly, and service locally with known parts, and because a 100-ton new machine’s export price excludes freight, duty, rigging, installation and training. Before choosing new and imported, add those costs and the waiting time to the export price.

At the small end, a used 2021 BP-3305CNC sold at $15,900 against $28,279 new, about 56% of the new price for a machine roughly five years old. Small CNC brakes appear to hold their value reasonably well, which also supports resale if you later outgrow one.

Practical advice

Start from your thickest and longest bend and the material, run the tonnage formula with the die you will actually use, and add a margin. Then decide how many back-gauge axes your parts need: two axes suit simple brackets, while flanged boxes and tapered parts benefit from four or more. Ask every supplier to quote the same package: machine, control, tooling, guarding, crowning, delivery, rigging, installation, training and warranty, and ask for a test bend of your own part. For used machines, check the hydraulic system for leaks, the ram for parallelism, the control for software support and parts, and that guarding meets your local safety rules; older brakes often need light curtains or laser guards added.

FAQs

How much does a CNC hydraulic press brake cost? A small 33-ton US-supplied CNC brake costs about $28,279. A Chinese manufacturer quotes $20,000 to $95,000+ for CNC hydraulic machines depending on tonnage, before shipping and import costs.

How much is a used 100-ton press brake? A 2000 Accurpress 100-ton, 10-foot CNC brake was listed at $49,500 in November 2026.

Are servo-electric press brakes worth the extra cost? They cost more (the same maker quotes $50,000 to $150,000+) and suit smaller, high-precision, high-volume work; hydraulic brakes remain the usual choice for heavy plate.

See our CNC machine prices, laser cutting machine prices and how we research prices.

Published November 2026. Sources: Penn Tool Co, DurmaPress 2026 price guide, Surplus Record Accurpress listing, Surplus Record Baileigh listing, Machineseeker and The Fabricator on tonnage. Prices change; confirm with sellers.

Leave a Comment

Your email address will not be published. Required fields are marked *

Scroll to Top