A hobby powder coating gun costs about $110, but a small professional set-up is a different scale: an 8x8x8 ft powder booth listed at $9,079 and an 8x8x10 ft gas curing oven at $17,357, plus delivery, put the booth and oven alone near $27,600 before the gun, compressor, gas line and electrical work. A professional Gema manual coating unit is listed at £7,935 ex VAT in the UK. Prices checked 14 November 2026.
| Grade / Item | Low | High | Unit |
|---|---|---|---|
| Hobby powder coating gun (Eastwood PCS-150) | 109.99 | 109.99 | USD |
| Professional manual unit, Gema OptiFlex Pro S (UK, ex VAT) | 7,935.13 | 7,935.13 | GBP |
| 8x8x8 ft powder booth (plus delivery) | 9,078.99 | 9,248.99 | USD |
| 8x8x10 ft gas curing oven (plus delivery) | 17,356.99 | 18,355.99 | USD |
What a “powder coating machine” actually is
Powder coating is a system, not a single machine. Dry powder is sprayed with an electrostatic gun so it clings to a grounded metal part, then the part is baked in an oven where the powder melts and cures into a hard finish. A working set-up needs four things:
- Gun and control unit: charges and sprays the powder. Hobby guns are simple; professional units control voltage and current and feed powder from a fluidised hopper.
- Booth: contains overspray and filters the air. Spray-to-waste booths filter and discard excess powder; recovery booths reclaim it.
- Curing oven: electric or gas, sized to the largest part. This is usually the biggest single cost.
- Pre-treatment: blasting, degreasing or chemical washing, because adhesion depends on a clean surface.
Powder coating equipment prices
| Equipment | Details | Price |
|---|---|---|
| Eastwood PCS-150 single-voltage gun system | Hobby gun, 15,000 V output; needs 5-10 psi air and a dedicated electric oven or toaster oven; powder not included | $109.99 |
| Gema OptiFlex Pro S manual coating unit (UK) | Professional unit, 18 L hopper with stirrer, 110 kV, PowerBoost and Precise Charge Control | £7,935.13 ex VAT (£9,522.15 inc VAT) |
| Davenport Custom Coatings 8x8x8 spray booth | Ships assembled, plug-in, pre-filter and V-bank secondary filter, no outside venting required | $9,078.99 + $170 delivery |
| Davenport Custom Coatings 8x8x10 powder coating oven | Propane or natural gas | $17,356.99 + $999 delivery |
| Columbia Coatings turn-key systems (oven, booth and gun, from 2x3x2 to 6x6x14 ovens) | Packaged systems | Price on request (“Call”) |
| Used Reliant Finishing Systems oven, 8x10x20 ft usable interior, natural gas, 750,000 BTU/hr, 2020, excellent condition | MachineHub listing, Illinois | Request a quote |
Tractor Supply, SprayDirect (UK), Zoro, Columbia Coatings and MachineHub, checked 14 November 2026. Several large suppliers, including PaintBooth.com, do not publish booth prices.
Our analysis: where the money goes
Adding the two Davenport items with delivery gives $27,604.98 for an 8x8x8 booth and an 8x8x10 gas oven. The oven is $18,355.99 of that, or about 66%. That ratio is the key planning fact: the oven’s inside dimensions set the largest part you can coat, so a shop that wants to do car frames, gates or railings has to size and pay for the oven first, and everything else follows. The gun is a much smaller share of the budget, although a professional unit like the Gema (£7,935 ex VAT) is still a serious purchase.
The hobby and professional ends barely overlap. A $110 gun with a dedicated toaster oven can coat brackets and small car parts; it cannot coat anything larger than the oven, and it cannot give the consistent film build and transfer efficiency that a commercial job requires. The step from hobby to a small business is therefore not $110 to $1,000 but $110 to roughly $30,000 or more once a booth, a walk-in oven, a compressor, a gas supply, electrical work and blasting equipment are included.
Costs that are easy to miss
- Utilities: a gas oven needs a gas line sized for its burner; electric ovens need heavy electrical circuits. Get an installer’s quote before buying.
- Compressed air: clean, dry air for the gun and blasting cabinet.
- Pre-treatment: a blast cabinet or wash system and the space for it.
- Racks, hooks and carts to move parts from booth to oven.
- Fire safety and permits: in the US, spray finishing rooms and booths are commonly reviewed against NFPA 33 and local fire codes; ask your fire marshal and insurer before installing.
- Powder and filters: ongoing consumables; spray-to-waste booths use more powder than recovery systems.
Practical advice
Measure the largest part you want to coat and add clearance for hanging and air flow; that sets the oven size. Then match the booth opening to the same parts. Ask suppliers for delivered and installed prices and for the oven’s heat-up time and burner rating, because a large oven that takes a long time to reach temperature costs fuel on every batch. If you are starting at home, never cure powder in an oven used for food, as the gun supplier itself requires a dedicated oven. Before buying a used oven, check the burner, controls and insulation, and budget for rigging and reassembly, which can be significant for walk-in units.
FAQs
How much does a powder coating machine cost? A hobby gun costs about $110. Professional manual units such as the Gema OptiFlex Pro S are listed at £7,935 ex VAT in the UK. A small professional booth and oven together cost about $27,600 with delivery in the US, before installation.
What is the most expensive part of a powder coating set-up? Usually the curing oven: about two-thirds of the booth-plus-oven cost in our example.
Can I powder coat with a kitchen oven? Not one used for food. Use a dedicated oven.
See our laser cleaning machine prices (an alternative to blasting for surface preparation), CNC press brake prices and how we research prices.
Published November 2026. Sources: Tractor Supply (Eastwood PCS-150), SprayDirect (Gema OptiFlex Pro S), Zoro booth, Zoro oven, Columbia Coatings and MachineHub. Prices change; confirm with suppliers.


