Hot Plate Welding Machine Price (2026): Plastic Part Welders and Pipe Butt Fusion

A hot plate welding machine costs about $5,000 to $6,500 new from Chinese suppliers for welding plastic parts such as car lamps, filters and tanks, and a used 2016 Branson HH15H hot plate welder was listed at $29,900 in the US. If you need to join plastic pipe, the same hot-plate principle is used in butt fusion machines, which cost about $375 for a small manual unit, $1,100 to $1,400 for a hydraulic 90 to 315 mm machine and up to about $3,600 for 630 mm pipe.

🔥Hot Plate Welding Machine Price Tracker
Updated: November 2026
Chinese part welder$5,000 – $6,500
Grade / ItemLowHighUnit
Automatic hot plate welder (China)$5,000$6,500USD FOB
Branson HH15H (2016), used$29,900$29,900USD
Manual butt fusion 63-160 mm$375$400USD
Hydraulic butt fusion 90-315 mm$1,100$1,380USD
Hydraulic butt fusion to 630 mm$1,500$3,580USD
Fitting fabrication machine$140,000$180,000USD
Supplier and dealer prices on the date shown. Full hot plate welding guide

Two different machines use hot plate welding

  • Hot plate welders for plastic parts press two moulded parts against a heated plate, withdraw the plate and press the melted edges together. They are used for automotive lamps, fluid reservoirs, battery cases, filters and tanks, and are built into production cells with part-specific tooling.
  • Butt fusion machines for pipe clamp two HDPE, PP or PVDF pipe ends, heat them on a heater plate and fuse them under pressure. They range from hand-operated tools to hydraulic site machines.

Hot plate welders for plastic parts

Machine Condition Price
Chinese automatic hot plate welder for lamps, filters and large parts New $5,000 to $6,500 (FOB)
Branson HH15H hot plate welder, 2016 Used, US dealer $29,900
Branson / Emerson HP60/40 heating element welder Used, Germany Price on request

New Western hot plate welders from Branson (Emerson), Forward Technology and similar makers are quoted per project, because the heated platens and fixtures are made for each part. The part tooling can cost as much as the machine frame, so ask for the price of a second set of tooling before choosing a supplier.

Butt fusion (hot plate) machines for plastic pipe

Machine Pipe range Price (FOB China)
Manual butt fusion welder 63 to 160 mm $375 to $400
Electric butt fusion welder 90 to 250 mm $500 to $570
Hydraulic butt fusion welder 40 to 160 mm $810 to $825
Hydraulic butt fusion welder 90 to 315 mm $1,100 to $1,380
Hydraulic butt fusion welder up to 450 mm $2,900 to $3,050
Hydraulic butt fusion welder up to 630 mm $1,500 to $3,580
Fitting fabrication butt fusion machine Workshop production $140,000 to $180,000

Made-in-China and Alibaba supplier listings checked November 2026.

What changes the price

  • Part or pipe size: larger platens and pipe diameters need bigger heaters, frames and hydraulics.
  • Control: manual, semi-automatic and fully automatic machines with data logging. For pipelines, many water and gas utilities require fusion records, which favours machines with data loggers.
  • Tooling: part-specific platens and fixtures for component welding; reducer inserts for pipe sizes.
  • Heater plate coating: non-stick coatings wear and must be maintained or replaced.
  • Power: large hydraulic machines need generator or three-phase power on site.

Used machines: what to check

Used component welders show up on machinery marketplaces, often from automotive suppliers closing lines; many are offered “price on request” and some only become available when a production line ends. Check that the platen size, stroke and controls suit your part, whether the original tooling is included, the condition of the heater plates and temperature controllers, and the safety guarding. For pipe machines, check the heater plate coating, facing tool blades and hydraulic hoses.

Questions to ask a supplier

  • What part sizes or pipe diameters does the machine cover, and which inserts or tooling are included?
  • What temperature control and data recording does it have?
  • Which welding standards can it meet for my application?
  • What is the warranty, and where are spare heater plates sold?
  • For component welders: what does an additional tooling set cost?

Two markets under one name

Component hot plate welders and pipe butt fusion machines use the same principle but are priced in completely different ranges.

The practical advice

For moulded parts, budget for part-specific tooling as well as the machine, and ask for a second tooling set’s price. For pipe, choose by diameter range and data-logging needs, since many utilities require fusion records.

FAQs

How much is a hot plate welding machine? About $5,000 to $6,500 new from Chinese suppliers for plastic parts, with used Western machines such as a 2016 Branson HH15H at about $29,900; pipe butt fusion machines cost about $375 to $3,600 depending on size.

Is butt fusion the same as hot plate welding? It uses the same principle, a heated plate that melts both surfaces before they are joined, applied to pipe ends.

Do I need a data logger? For utility pipelines, often yes; check your client’s specification.

See our automatic pipe welding machine guide, blow molding machine prices and how we research prices.

Published November 2026. Sources: Made-in-China plastic welders, Made-in-China pipe welding machines, Made-in-China plastic welding machines, Alibaba supplier listings, Revelation Machinery Branson HH15H listing and Machineseeker. Prices change; confirm with suppliers.

Leave a Comment

Your email address will not be published. Required fields are marked *

Scroll to Top