Rotomolding Machine Price (2026): Rock and Roll, Shuttle and Used Machines

A rotomolding (rotational molding) machine costs about ₹5.6 lakh to ₹10 lakh in India for a rock-and-roll or basic shuttle machine of the type used to make plastic water tanks, and about ₹22 lakh for an automatic shuttle machine. In the US, used shuttle and turret machines from Ferry, STP, Rotoline and REI are sold through specialist dealers, almost always on request.

🛢Rotomolding Machine Price Tracker
Updated: November 2026
Rock and roll machine (India)₹5.6 – 10 lakh
Grade / ItemLowHighUnit
Rotomolding machine, basic5,60,0005,60,000INR
Rock and roll machine, 15-20 ft chamber6,00,0006,10,000INR
Shuttle rotomoulding machine6,00,0006,00,000INR
Water tank machine, 5,000+ litres6,20,0006,20,000INR
Close-type rock and roll6,25,0006,25,000INR
Rock and roll, Ahmedabad maker8,50,0008,50,000INR
Rock and roll, 1,000-2,000 L tanks10,00,00010,00,000INR
Automatic shuttle machine22,00,00022,00,000INR
Indian supplier listings on the date shown; GST and freight may be extra. Used US machines are priced on request. Full rotomolding guide

Machine types

  • Rock and roll machines rotate a mould fully on one axis while rocking it on the other. They suit long parts such as water tanks, kayaks and ducts, and are the most common choice for tank makers in India.
  • Shuttle machines move one or two arms between an oven and a cooling station, so one mould cools while another heats.
  • Carousel or turret machines rotate three or four arms through loading, heating and cooling stations for higher output.

Rotomolding machine prices in India

Machine Details Price
Rotomolding machine Basic, electric ₹5,60,000
Rock and roll rotomolding machine 15 to 20 ft chamber, semi-automatic, 10 to 15 kW ₹6,00,000
Shuttle rotomoulding machine Industrial ₹6,00,000
Rock and roll roto molding Up to 5 tonnes a day ₹6,10,000
HDPE water tank making machine Tanks over 5,000 litres ₹6,20,000
Close-type rock and roll machine Ahmedabad maker ₹6,25,000
Rock and roll machine Ahmedabad maker ₹8,50,000
Rock and roll rotational moulding machine 1,000 to 2,000 litre tanks, semi-automatic ₹10,00,000
Automatic shuttle rotomolding machine 30 to 100 kW, 500 to 2,000 kg capacity ₹22,00,000

Aajjo and TradeIndia supplier listings, checked November 2026.

Used machines in the US

US dealers list a steady supply of used rotomolders: STP ZS-80, ZS-100, ZS-120 and ZS-160 inline shuttle machines (84 to 144 inch swing, up to 2.5 million BTU per hour), a 1999 Ferry E-100 Rotospeed Express shuttle with 4.5 million BTU, a 1999 REI two-arm shuttle, a 2016 Rising Sun CS-6500 shuttle with a 4,500 kg arm load, a 2022 Rotoline DC 2.50 XT shuttle, a Ferry RS-160 turret machine, and complete used rock-and-roll machines with cooling towers. Dealers price these on request, and several highlight that machines can be inspected under power.

Our analysis: the mould and the oven matter as much as the machine

In rotomolding, the machine is a heated, rotating frame; the product is defined by the mould, and output by oven size, burner capacity (BTU) and arm load. A low-priced rock-and-roll machine can be the right buy for a single tank design, but each new tank size needs its own mould, and moulds for large tanks are a significant cost. When comparing machines, compare swing diameter (the largest part that fits), maximum arm load, heating capacity and fuel type, not just the price.

Export prices from an Indian manufacturer

Indian rotomolding machine makers also sell abroad, and their export listings give US-dollar prices:

Machine Details Export price
Automatic rock-and-roll rotomolding machine New; 6 HP; 3-phase 380/220/415V; gas or diesel; mould sizes up to 5.0 × 6.0 m $10,000 for one unit; $9,000 for two or more
4-arm bi-axial rotomolding machine 25-50 HP, 415V; LPG or diesel; about 5,000 kg; mould sizes up to 3.5 × 4.0 m $75,000 for one unit; $70,000 for three or more

Alibaba listings by Vishnu Engineering, Gujarat, checked 19 November 2026. Freight, duty and installation extra. The 4-arm listing gives conflicting tank capacities (up to 20,000 litres in one place and 40,000 in another), so ask for the specification in writing.

Our analysis: the 4-arm machine costs about 7.5 times the rock-and-roll machine from the same maker ($75,000 against $10,000). The extra money buys parallel working: while one arm is in the oven, others are cooling, unloading and loading, so several moulds are in process at once. For a tank maker making one or two large sizes, the rock-and-roll machine is the cheaper route; for a moulder making many smaller parts, the multi-arm machine’s output per hour is what justifies the price. Either way, the moulds are bought separately.

Practical advice

Start from the parts you will make and their sizes. For water tanks, a rock-and-roll machine is the usual entry point; for many smaller parts, a shuttle or carousel gives better throughput. Budget for moulds, a cooling system, LLDPE powder supply and grinding equipment if you compound your own powder. For used machines, see them run under power and check burners, drives and controls.

FAQs

How much is a rotomolding machine? About ₹5.6 lakh to ₹10 lakh in India for rock-and-roll and basic shuttle machines, and about ₹22 lakh for an automatic shuttle machine; used US machines are priced on request.

What is a rock and roll machine used for? Long parts such as water tanks, kayaks and ducts.

See our blow molding machine prices and how we research prices.

Published November 2026. Sources: Aajjo rotomoulding listings, Aajjo rock and roll listings, Aajjo roto molding listing, TradeIndia shuttle machine, PlastiWin used rotomolders, KD Machinery Rotoline listing and Surplus Record Ferry listing. Also: Alibaba rock-and-roll listing, Alibaba 4-arm listing. Prices change; confirm with suppliers.

Leave a Comment

Your email address will not be published. Required fields are marked *

Scroll to Top