Compressed Air Dryer Price: $1,080 Shop Units to $56,815 at 3,000 CFM (2026)

A refrigerated compressed air dryer costs $1,080-$2,073 for value-line units from 15 to 50 SCFM, $1,635-$3,448 for Quincy’s standard non-cycling line through 106 CFM, $2,053-$8,633 for the energy-saving cycling series, and five to six figures at plant scale, topping out at $56,815 for a 3,000 CFM unit at sale price, per one dealer’s full Quincy catalog checked 21 November 2026. The arithmetic worth knowing: a dried CFM costs about $126 at the smallest size and under $20 at the largest, the steepest scale curve we’ve measured in the compressed-air aisle.

💧Air Dryer Price Tracker
Updated: 21 November 2026
Quincy QPNC 106 (106 CFM non-cycling)$3,448
Grade / ItemLowHighUnit
COOL value line (15-100 SCFM)1,0802,771USD
QPNC standard (13-106 CFM)1,6353,448USD
QED cycling (15-200 CFM, sale)2,0538,633USD
Plant scale QPNC 636-3000 (sale)12,22556,815USD
Compressor World Quincy catalog, 21 Nov 2026. Full scrap price index

The ladder, five series deep

Series / model Capacity Price
COOL 15 / 50 / 100 (value, non-cycling) 15-100 SCFM $1,080 / $2,073 / $2,771
QPNC 13 / 42 / 106 (standard non-cycling) 13-106 CFM $1,635 / $2,126 / $3,448
QED-15 / 50 / 100 (cycling) 15-100 CFM $2,053 / $3,593 / $5,603 sale
QRHT 25 / 100 (high inlet temperature) 25-100 CFM $3,065 / $6,391
QPNC 636 / 1600 / 3000 (plant scale) 636-3,000 CFM $12,225 / $30,666 / $56,815 sale
QPVS-210 / 850 (variable speed) 210-850 CFM $9,772 / $26,254 sale

Compressor World’s Quincy catalog, checked 21 November 2026; sale prices quoted where the listing shows both. The full catalog runs over sixty models between the rows shown.

Why the dryer exists: the water in your air

Compressing air concentrates its moisture, and everything downstream pays for it: water in the line becomes fisheyes in powder coating, destroyed consumables in plasma cutting, rusted tools and ruined pneumatics. A refrigerated dryer chills the air to around the 35-38F dew point class, condenses the water out, and reheats the air on the way to the shop. It is the standard answer for general industrial work; desiccant dryers, a different and costlier technology reaching far lower dew points, belong to instrument air, outdoor lines that freeze, and processes that specify them. The buying rule that matters most is sequencing: the dryer is not an accessory but the second half of the compressor purchase, sized to the compressor’s output, and shops that defer it are financing the deferral with consumables and rework.

Reading the series: what each premium buys

At the same capacity, the catalog prices its engineering plainly. The value line to the standard line, COOL 100 at $2,771 against QPNC 106 at $3,448, buys build and brand depth. Non-cycling to cycling, QPNC 30 at $1,935 against QED-30 at $2,790 sale, buys a dryer that idles its refrigeration when demand drops instead of running flat out, an energy saving that repays the premium in proportion to how variable your air demand is. The high-temperature series, QRHT 25 at $3,065 against COOL 25 at $1,357, more than doubles the price to accept the hot discharge of piston compressors without an upstream aftercooler, which is exactly the small-shop pairing. Variable speed does for the dryer what VSD does for the compressor, matching refrigeration to load continuously, and prices accordingly. None of these premiums is padding; each maps to a measurable operating condition, and the buyer’s job is knowing which conditions are theirs.

The scale curve: $126 to $19 per CFM

Dividing price by capacity down the non-cycling line, a dried CFM costs about $126 at 13 CFM, $51 at 42, $33 at 106, $19 at 636, and stays under $20 through 3,000 CFM. The curve is steeper than the compressor market’s own, because a dryer is mostly heat exchanger and refrigeration circuit, components that scale generously. The practical consequences mirror our generator guide: never undersize to save money, because small capacity is the most expensive kind, and when demand sits near a model boundary, the next size up usually costs little and buys real headroom. Dryers are also sized with correction factors, inlet temperature, ambient temperature and pressure all derate the nameplate, so the honest sizing is the corrected one from the compressor’s actual discharge conditions, not the catalog number that matches the compressor’s CFM on paper.

The rest of the clean-air stack

A dryer alone is not dry air. The working stack runs aftercooler or high-temp tolerance, water separator, particulate and coalescing filters, the dryer, and drains that actually discharge, timer or zero-loss, at every collection point, with filter elements as the stack’s recurring consumable. Budgeting the stack at a third beyond the dryer’s own price is a reasonable planning posture for a first system, and the payoff arrives as boring reliability: paint that lays flat, plasma consumables that last their rated pierces, and air tools that reach their service intervals. As everywhere in this series, the machine is the entry fee and the consumable schedule is the subscription, and in compressed air the subscription is mercifully cheap once the system is sized honestly.

Who buys which series

n

The value line serves garage shops, small fabrication and anyone pairing a dryer with a single reciprocating compressor; the high-temperature series is the same buyer who skipped the aftercooler. The standard non-cycling line is the default for steady single-shift industrial demand, where the refrigeration running flat out matches the plant running flat out. Cycling and variable-speed units belong to multi-shift plants and variable-demand shops, body shops, job shops, anywhere the compressor loads and unloads all day, because their premium is repaid in exactly those idle hours. Plant-scale units are engineering purchases that arrive with the compressor room’s design. The used market in this category is thinner than for compressors, refrigeration circuits age like the HVAC equipment they are, and a failed circuit costs most of a new unit to rebuild, which is why dryers are usually bought new even by shops that buy compressors used.

Our analysis

The cheapest dried air is bought in bulk, and the premiums are legible. $126 falling to $19 per CFM is the catalog’s way of saying capacity costs little at scale; meanwhile every series premium, cycling, high-temp, VSD, maps to a named operating condition, making this one of the most honestly-priced categories we track.

The dryer is half the compressor purchase, not an accessory. Downstream failures, coating fisheyes, burned plasma consumables, dead air tools, are how shops pay for skipping it; the $1,080 entry unit is cheaper than any month of those.

Practical advice

  • Size from the compressor’s corrected output, with inlet and ambient derates applied, not nameplate-to-nameplate.
  • Piston compressor without an aftercooler? That’s the high-temperature series’ whole purpose.
  • Variable air demand favors cycling or VSD; steady full-load demand lets non-cycling win on price.
  • Budget the filter-and-drain stack with the dryer; elements are the real consumable.
  • Near a size boundary, step up; the scale curve makes headroom nearly free.

FAQs

How much does a compressed air dryer cost? $1,080-$2,771 for value-line units 15-100 SCFM, $1,635-$3,448 standard non-cycling to 106 CFM, $2,053-$8,633 cycling, and $12,225-$56,815 at plant scale (dealer catalog, 21 Nov 2026).

Refrigerated or desiccant? Refrigerated covers general shop and industrial work at 35-38F class dew points; desiccant serves instrument air, freezing environments and specified processes at a different price level.

What does cycling buy over non-cycling? Refrigeration that idles when air demand drops; the premium, about $850 at 30 CFM, repays in proportion to how variable your demand is.

Why do high-temperature models cost double? They accept piston-compressor discharge heat without an aftercooler, the exact condition of most small shops.

What size do I need? The compressor’s corrected output after temperature and pressure derates, then the next size up if you’re near a boundary; undersized dryers pass water downstream.

What else does dry air need? Separator, filters and working drains around the dryer; budget roughly a third beyond the dryer for the stack on a first system.

See our air compressor guide, our plasma cutter guide, our powder coating guide, and how we research prices.

Updated November 2026. Source: Compressor World Quincy refrigerated dryer catalog, checked 21 November 2026. Per-CFM figures are our arithmetic from listed prices; apply correction factors before sizing.

Leave a Comment

Your email address will not be published. Required fields are marked *

Scroll to Top