An air compressor costs $800-$2,500 for a single-stage shop piston unit, $1,500-$8,000 for two-stage reciprocating machines, and $7,000-$35,000 for fixed-speed rotary screw compressors in the 10-50 HP industrial range, with variable-speed (VSD) screws at $12,000-$80,000+ (Air Compressor Zone guide, 10 March 2026). Live store prices put flesh on the screw tier: a 10 HP Chicago Pneumatic tank-mounted unit at $8,999 and a 15 HP with integrated dryer at $15,995 (Portland Compressor, 21 November 2026).
| Grade / Item | Low | High | Unit |
|---|---|---|---|
| Shop two-stage piston (5-10 HP) | 1,500 | 5,000 | USD |
| Small screws, live 5-15 HP prices | 6,559 | 15,995 | USD |
| 25 HP fixed screw (guide band) | 14,000 | 22,000 | USD |
| Used 25 HP Atlas Copco (8,000 hrs, serviced) | 6,000 | 9,000 | USD |
Price by type and horsepower
| Type | HP | New price |
|---|---|---|
| Shop reciprocating, single-stage | 2-5 | $800 to $2,500 |
| Shop reciprocating, two-stage | 5-10 | $1,500 to $5,000 |
| Professional two-stage | 10-15 | $3,000 to $8,000 |
| Rotary screw, fixed speed | 10-50 | $7,000 to $35,000 |
| Rotary screw, 25 HP fixed | 25 | $14,000 to $22,000 |
| Rotary screw, 50 HP fixed | 50 | $22,000 to $40,000 |
| Rotary screw, variable speed (VSD) | 15-100 | $12,000 to $80,000+ |
| Oil-free rotary screw | 25 | $30,000 to $50,000 |
Source: Air Compressor Zone, 10 March 2026. The same guide prices a documented-service, 8,000-hour used 25 HP Atlas Copco at $6,000-$9,000 against ~$18,000 new, and puts the major-brand premium (Ingersoll Rand, Atlas Copco, Quincy, Gardner Denver) at 30-40% over imports.
Live store prices: the small-screw tier
| Model | HP | Configuration | Sale price (list) |
|---|---|---|---|
| Chicago Pneumatic QRS 5.5 TM | 5 | 60-gal tank | $6,559 ($9,834) |
| Chicago Pneumatic QRS 7.5 BM | 7.5 | Base mount | $8,763 ($10,954) |
| Chicago Pneumatic QRS 10 TM | 10 | 120-gal tank | $8,999 ($13,981) |
| Chicago Pneumatic QRS 7.5 TM | 7.5 | 60-gal tank | $9,185 ($11,481) |
| Chicago Pneumatic QRS 7.5HPD | 7.5 | Tank + dryer | $9,995 ($15,450) |
| Ingersoll Rand UP6-10TAS | 10 | Base + dryer + filters | $13,360 ($15,253) |
| Chicago Pneumatic QRS15HPD | 15 | 120-gal tank + dryer | $15,995 ($20,772) |
Portland Compressor store listings, 21 November 2026; sale prices with list in parentheses. Note the pattern: the integrated dryer adds $1,000-$7,000 over the same machine bare, and discounting off list runs 10-35%, so list prices in this market are openers, not answers.
Piston or screw: the duty-cycle line
The type decision is about how many hours a day the machine works. Reciprocating (piston) compressors are cheap, simple and happy at intermittent duty, filling a tank and resting, which covers garages, small fab shops and trim crews. Rotary screws are built to run continuously, delivering steady air for production: a powder coating line, a plasma table, CNC machinery or a molding operation‘s automation. The crossover math: once a shop’s air demand keeps a piston unit running more than roughly half the day, its wear and energy argue for the screw’s higher sticker, and the $6,559-$9,999 small-screw tier above exists precisely for shops making that jump. VSD screws take the logic further, matching motor speed to demand; their $5,000-$15,000 premium over fixed-speed repays itself only where demand genuinely varies through the shift, which is why honest dealers ask for your load profile before quoting one.
The system around the compressor
Compressed air is a system purchase. The dryer, visible as a $1,000-$7,000 adder in the live listings, protects tools and finishes from water, and is non-negotiable for painting and powder work. Filters, tank (buy tank-mounted where offered; separate receivers add cost and floor space), piping in the shop, and a condensate drain complete the install. Electrical supply decides more purchases than buyers expect: most screws above 5 HP want three-phase power, and the single-phase 7.5 HP QRS at the same $8,763 as its three-phase twin exists for shops without it. Budget installation and piping as a project line, and treat the compressor room’s ventilation seriously, because screws reject heat all day. The energy bill is the lifetime story: a continuously-run screw’s electricity routinely exceeds its purchase price over several years, which is where efficiency premiums and leak-fixing pay better returns than purchase negotiations.
Used market and maintenance
The guide’s used example, a serviced 8,000-hour 25 HP Atlas Copco at $6,000-$9,000 versus $18,000 new, maps the opportunity: screws with documented service history trade at a third to half of new, because airends are engineered for tens of thousands of hours. The documentation is the value: oil-analysis records and service intervals separate a bargain from a core. Ownership costs are scheduled and knowable: oil and separator changes, filters, and eventually an airend rebuild that is the machine’s one big bill. Piston units are simpler still, with valves and rings as the wear items. For either type, a maintenance contract from the supplying dealer converts surprises into line items, the same trade our laser welding guide describes for its machines.
Sizing by CFM: the ten-minute homework
Horsepower sells compressors, but CFM at pressure runs shops, and the sizing exercise takes ten minutes that save thousands. List every air tool and machine with its CFM rating at your working pressure (usually 90 PSI for tools), estimate each one’s duty cycle through a busy hour, and sum the simultaneous demand with a margin of roughly a quarter to a third for leaks and growth. A rule-of-thumb translation, 3.5-4.5 CFM per HP for screws, then maps demand to the tables above: a two-bay shop running die grinders and a blast cabinet discovers it needs the 7.5-10 HP screw tier, not the 5 HP piston the budget preferred. Oversizing wastes capital and, on fixed-speed screws, cycles the machine inefficiently; undersizing shows up as falling pressure exactly when every bay is busy. The load profile also answers the VSD question honestly: steady demand wants a fixed-speed screw plus a properly sized tank, while swinging demand across shifts is where variable speed earns its premium.
Who sells what, and where to buy
The channel shapes the deal. National e-commerce stores (the live listings above) publish real prices and ship nationwide, which makes them the benchmarking tool even if you buy locally. Local compressed-air distributors add install, piping, service contracts and loaners, and their quotes bundle those; unbundle them to compare against the online benchmark, then decide what the local relationship is worth, which for a production shop whose machines stop without air is usually quite a lot. Industrial auctioneers and used-equipment dealers carry the screw bargains, with the documentation caveat above. And the big-box tier sells the piston entry level perfectly well; a garage buying a $1,200 two-stage needs no distributor. Matching the channel to the machine class, benchmarks online, relationships for production assets, is most of the negotiation.
Our analysis
The dryer decision is the honest price gap. Live listings show the same 7.5 HP screw at $9,185 bare and $9,995-$12,360 with integrated drying, and finish-quality work has no real choice; comparing quotes without matching dryer specs is the most common apples-to-oranges error in this market.
Street beats list by double digits. With live discounts of 10-35% off list on current models, the list prices that anchor most published guides overstate the market; quote at least two dealers and let the discounts compete.
Practical advice
- Size by CFM at your working pressure, not HP; tools’ air consumption adds up, and undersizing shows up as pressure drop at the worst time.
- Confirm three-phase availability before falling for a screw quote, or price the single-phase variants.
- Match dryer specs across quotes, and include piping and install in the project budget.
- On used screws, demand service records and hours; the airend’s history is the price.
FAQs
How much does an air compressor cost? Shop piston units $800-$5,000; professional two-stage $3,000-$8,000; rotary screws $7,000-$40,000 through 50 HP, with live 5-15 HP screw prices at $6,559-$15,995; VSD and oil-free run higher (sources, Mar-Nov 2026).
Piston or rotary screw? Piston for intermittent duty, screw for continuous; the jump pays once air demand runs much of the day.
What does a dryer add? $1,000-$7,000 on the same machine in live listings, and it is mandatory for paint and powder work.
Are brand premiums real? Majors run 30-40% over imports; they buy parts networks and airend longevity, which matter most at continuous duty.
What do used screws cost? Documented-service machines at a third to half of new, like the $6,000-$9,000 25 HP Atlas Copco example.
Why is my quote below list? Normal: live discounting runs 10-35%; make dealers compete on the street price.
See our powder coating machine guide, our laser welding machine guide, our plastic molding machine guide, and our plasma cutter price guide and our air dryer guide and how we research prices.
Updated November 2026. Sources: Air Compressor Zone cost guide (10 March 2026), Portland Compressor store listings (21 November 2026). The first guide’s internal ranges are not fully consistent, which we note; prices change, so get live quotes.


