A metal-cutting band saw costs $2,749-$3,249 for JET’s 14-inch vertical machines, $3,700 for a geared-head 7×10.5 horizontal/vertical, and $5,220-$6,819 at dealer sale prices for the 8-3/4 to 10×18 horizontal production classes ($6,568-$8,379 at list), per listings checked 21 November 2026. Three machines at one dealer carried nearly the same discount, about 18-19 percent off list, which says the “sale” is the street price and the list price is the fiction, a pattern worth knowing before comparing quotes.
| Grade / Item | Low | High | Unit |
|---|---|---|---|
| JET 14\" verticals (J-8203K / J-8201VS) | 2,749 | 3,249 | USD |
| 7x10.5 geared-head combo | 3,700 | 3,700 | USD |
| Horizontal classes, street (J-9225 to HBS-1018W) | 5,220 | 6,819 | USD |
| Same machines at list | 6,568 | 8,379 | USD |
The JET ladder across three dealers
| Machine | Type | Price |
|---|---|---|
| JET J-8203K 14″ (3-phase) | Vertical, metal/wood | $2,749 |
| JET J-8201VS 14″ variable speed | Vertical, metal/wood | $3,249 |
| JET 12A 7″ x 10-1/2″ geared head | Horizontal/vertical, mitering | $3,700 |
| JET J-9225 8-3/4″ Zip Miter | Horizontal, mitering | $5,220 sale / $6,568 list |
| JET HBS-916 (9″ x 16″) | Horizontal | $5,972 sale / $7,338 list |
| JET HBS-1018W (10″ x 18″) | Horizontal | $6,819 sale / $8,379 list |
Global Industrial (verticals), Tractor Supply (7×10.5) and Elite Metal Tools (horizontal classes), checked 21 November 2026. Capacity names (9×16, 10×18) are the round and rectangular stock the saw swallows, in inches.
Horizontal or vertical: two different jobs
The two formats share blades and little else. A horizontal saw is a stock-cutting machine: the bow falls through a clamped bar, feeding itself by gravity or hydraulics, and its job is turning 20-foot sticks of bar, tube and structural steel into workpieces, often unattended, the sawyer stacking parts while the blade works. A vertical saw is a shaping machine: the operator steers the work into a fixed blade, cutting curves, notches and internal profiles that no other machine touches as cheaply. Fabrication shops usually need the horizontal first, because everything downstream, the ironworker, the tube bender, the mill, starts with stock cut to length; the vertical arrives when pattern and repair work justify it. The 7×10.5-class combination machines fold both into one budget frame, the compromise being lighter duty in each role.
The specs that separate lookalike saws
Within a format, four specs carry the money. Capacity is the headline, the largest round and rectangle the saw swallows, and it should be bought against your actual stock list the way we size shears against sheet. Mitering, the ability to swing the head for angle cuts, is what the Zip Miter class sells, and structural work lives on it. Drive quality, geared heads running in oil baths against belt drives, is the duty-cycle spec, the difference between a saw that cuts all day and one that rests. Blade speed range decides material range: slow speeds for tool steels and stainless, faster for aluminum, and variable-speed machines buy that whole range, which is exactly why the 14-inch VS vertical carries a $500 premium over its single-speed sibling. Coolant systems, standard on the production classes, finish the list; dry cutting is for the occasional-use tier.
Blades: the honest consumable
Band saws run the gentlest consumable bill in the fabrication shop, but it is not zero and it rewards attention. Bi-metal blades are the working standard, bought per loop to the machine’s length, and their cost per cut depends almost entirely on operator discipline: correct tension, correct speed for the material, and a proper break-in on the first cuts multiply blade life. Carbide-tipped blades cost several times more and earn it only on hard or abrasive materials and production volumes. The budgeting rule mirrors every category we track: price a season of blades for your material mix alongside the machine, and when a used saw is cheap, look at its guides and tension mechanism first, because worn guides eat blades and the savings with them.
Who buys which saw, and the automation step above
The 14-inch verticals sell to pattern shops, maintenance departments and schools, machines whose value is versatility per square foot. The combo class belongs to garage fabricators and one-person shops making their first stock-cutting purchase. The mitering horizontals serve structural and railing fabricators living on 45-degree cuts, and the 9×16 to 10×18 classes are the general fab shop’s workhorses, sized to the bar and tube the ironworker and bender downstream expect. Above everything here sits the automatic tier, saws with powered feed, bundle clamping and programmable cut lists that run stock unattended by the hour; they price in the five figures and earn it only at production volume, the same utilization logic that separates every tier in this series. The step to watch for mid-size shops is semi-automatic, hydraulic down-feed and auto-shutoff, which buys most of the unattended benefit at a fraction of the automatic price.
Rental barely exists for band saws, they are cheap enough to own and awkward to move, so the real alternatives are the chop saw below and the shear beside: abrasive and cold saws cut faster per cut but burn consumables and leave harder edges, and the comparison that matters in a busy shop is cost per cut over a season, where the band saw’s slow blade and gentle bill almost always win the volume work.
Our analysis
The list-price fiction is measurable here. Three horizontal models at one dealer carried discounts of 18.6, 18.6 and 20.5 percent on the same day, which means the sale price is the standing street price; comparing one dealer’s sale against another’s list overstates the gap, so compare like against like, the lesson our tube bender guide taught from the other direction.
Buy the horizontal for throughput, the vertical for freedom, and resist the combination unless space forces it. The $3,700 combo machine is real value for a small shop, but shops that grow report the same path: the combo becomes the vertical, and a dedicated horizontal takes over stock cutting.
Practical advice
- Size capacity against your stock list, not the biggest bar you can imagine buying.
- Structural and frame work wants a mitering head; retrofitting angles onto a straight-cut saw wastes material.
- Compare dealers at the same price type; the ~19 percent “sale” is the street price.
- Budget bi-metal blades for your material mix and learn blade break-in; it is free blade life.
- On used saws, inspect guides and tension before anything else; worn guides eat the savings in blades.
FAQs
How much does a metal band saw cost? $2,749-$3,249 for 14″ verticals, about $3,700 for a 7×10.5 combo, and $5,220-$6,819 at street prices for 8-3/4″ to 10×18 horizontal classes (listings, 21 Nov 2026).
Horizontal or vertical? Horizontal cuts stock to length, often unattended; vertical shapes and notches under operator control. Fab shops usually need the horizontal first.
What do the capacity names mean? The round and rectangular stock the saw swallows: a 9×16 takes 9″ rounds and 9×16 rectangles.
Are the sale prices real? They are the street price: three models at one dealer showed 18-20 percent off list on the same day, so treat list as the fiction and compare sales to sales.
What blades should I run? Bi-metal for general work, carbide only for hard or abrasive material at volume; tension, speed and break-in discipline decide blade cost more than brand.
What should I check on a used saw? Blade guides, tension mechanism, drive condition and vise squareness; guides are where neglected saws hide their cost.
See our ironworker guide, our hydraulic shear guide, our tube bender guide, our CNC machine price guide, and our drill press guide and how we research prices.
Updated November 2026. Sources: Global Industrial JET vertical listings, Tractor Supply JET 12A listing, Elite Metal Tools J-9225, HBS-916 and HBS-1018W listings, all checked 21 November 2026. Prices change; compare at the same price type.


