Ironworker Machine Price: $18,890 at 50 Tons to $35,299 at 100 Tons (2026)

An ironworker machine costs $18,890-$21,390 for Scotchman’s 50-ton models, $28,639-$32,390 at the 65-ton class where Edwards and Scotchman meet, and $33,989-$35,299 for Edwards’ 100-ton Deluxe depending on voltage, per dealer listings checked 21 November 2026. Tonnage maps to the steel it processes, and the five-workstation format, punch, shear, notch, bend, cope, is what the money actually buys: one hydraulic ram feeding five jobs that would otherwise be five machines.

🔨Ironworker Price Tracker
Updated: 21 November 2026
Edwards 65 Ton (5 workstations, sale price)$28,639
Grade / ItemLowHighUnit
Scotchman 50-ton (50514-EC / 5014-ET)18,89021,390USD
65-ton class (Edwards / Scotchman)28,63932,390USD
Edwards 100 Ton Deluxe (by voltage)33,98935,299USD
Trick-Tools and The Power Tool Store listings, 21 Nov 2026. Tooling extra. Full scrap price index

The ladder: 50 to 100 tons, priced

Machine Tonnage Price
Scotchman 50514-EC (3-phase) 50 $18,890 (+$600 for single-phase)
Scotchman 5014-ET 50 $21,390
Edwards 65 Ton (5 workstations) 65 $28,639 sale / $30,589 list
Scotchman 6509-24M 65 $32,390
Edwards 100 Ton Deluxe w/ PowerLink 100 $33,989-$35,299 by voltage

Trick-Tools (Scotchman) and The Power Tool Store (Edwards) listings, checked 21 November 2026. The Edwards 100-ton spread is voltage alone: 208/230V three-phase at $33,989, 460V at $34,659, 575V at $35,299.

What the tonnage actually means

Ironworker tonnage is punching force, and the spec sheets translate it into steel: the 50-ton Scotchman punches a 1-1/4″ hole through 1/2″ plate, shears 4x4x3/8 angle at 90 degrees and flat bar to 3/4″ by 4″. Stepping tiers buys thicker plate, bigger angle and larger punch diameters, and the honest sizing method is the same one we recommend for plasma cutters: list the thickest material you process weekly, not the thickest you can imagine, and buy the tonnage that handles it with a margin. Fabricators overbuy tonnage more than any other spec because tonnage is the headline number, but an oversized ironworker punches the same holes while costing more to buy and feed hydraulically.

Five stations, one ram: the economics of the format

An ironworker’s value proposition is consolidation. Punching, shearing flat bar, shearing angle, notching and bending are separate machines in a large shop; an ironworker runs them all off one hydraulic system, sequentially rather than simultaneously. For the one-to-five-person fabrication shop, that trade is nearly always right: the machine earns its keep the first time a job needs twenty punched holes and a dozen sheared angles before lunch. For production shops the calculus flips, because one operator on the punch station blocks the shear, which is why bigger operations run dedicated machines and keep the ironworker for odd jobs. The attachment catalogs, fourteen interchangeable attachments on the Edwards open station, seventeen accessories, are where the format quietly becomes a platform: pipe notchers, picket tools, press brake dies, each a few hundred to a few thousand dollars, each cheaper than the standalone machine it replaces.

Voltage pricing, and a contrast worth noticing

The Edwards 100-ton lists five voltage variants spanning $1,310, with 575V, the Canadian industrial standard, at the top. That contrasts with the commercial generator market we priced this month, where Cummins lists identical prices across voltages, and the difference is informative: generator makers absorb configuration costs into volume SKUs, while machine-tool builders price each motor and starter package. For buyers the advice is the same either way: match the machine to the shop’s existing service, because a voltage mismatch costs a transformer or an electrician, and the $600 single-phase premium on the Scotchman is the market’s price for a small shop’s wiring reality.

New versus used, and what wears

Ironworkers are among the most durable machines in any shop, a frame, a ram and tooling, which makes the used market active and the pricing logic simple: the frame survives decades, so a used machine’s price is really a bet on the hydraulic system’s condition and the availability of punches, dies and blades. Name brands with live tooling catalogs, Scotchman, Edwards, Piranha, hold value for the same reason used OMAX waterjets do in our waterjet guide: the consumable and attachment ecosystem is the moat. A worn used machine with scarce tooling is cheap for a reason; fresh blades and a punch set are a four-figure bill before the first cut.

The tooling bill: punches, dies and blades

The sticker buys the ram; the tooling makes it a machine. Punches and dies come in sets by diameter and are consumable in the honest sense, they wear, they chip on hard material, and a mis-stripped punch is scrap in one stroke. Shear blades for the flat-bar and angle stations are reversible and then replaceable, and a full blade set is a four-figure order on the bigger machines. The budgeting pattern matches every category we track where consumables carry the economics: price a working tooling package, the punch-and-die sizes your drawings actually call for plus a blade set, with the machine, and favor brands whose catalogs will still stock those sizes in fifteen years. This is where the $600-$4,000 gaps between rival stickers stop mattering: a machine whose tooling you can get next-day is worth a premium that no spec sheet shows.

Who buys which tonnage

The 50-ton class sells to ornamental iron shops, railing and gate fabricators, trailer builders and farm shops, work that lives in 1/4″ to 1/2″ material and 2-3″ angle. The 65-ton class is the general structural fab shop’s machine, covering the 1/2″ to 3/4″ plate and 4″ angle that most commercial work specifies. The 100-ton-and-up class belongs to steel service centers and heavy structural shops punching 1″ plate and shearing 6″ angle, buyers who usually also run dedicated beam lines. Rental barely exists in this category, the machines are too heavy to move casually and too cheap to meter, so the buy decision is really a utilization decision: an ironworker that saves an hour of grinding, drilling and sawing a day repays the 50-ton sticker inside two years at shop rates.

Our analysis

The 65-ton class is the small-shop sweet spot, and the brands price it within $4,000 of each other. Edwards at $28,639 sale and Scotchman at $32,390 bracket the class where most structural fab work lands, 1/2″ to 3/4″ plate, 4″ angle, and the choice between them is usually attachment ecosystem and dealer proximity, not capability.

Buy the workstations, size the tonnage honestly. The format’s value is five machines in one footprint; the tonnage ladder just sets material limits. A 50-ton machine at $18,890 covers most ornamental and light structural work, and the $15,000 step to 100 tons is only money well spent when the plate thickness demands it weekly.

Practical advice

  • Size by your weekly thickest material, with one tier of margin; tonnage is the most overbought spec.
  • Match voltage to your shop service; the variants differ by four figures and a transformer costs more.
  • Price a punch-and-die starter set with the machine; tooling is the real day-one bill after the sticker.
  • Used buys are hydraulics-and-tooling bets; favor brands with live attachment catalogs.
  • Production volume on one station? Price the dedicated machine; the ironworker’s trade is versatility, not throughput.

FAQs

How much does an ironworker machine cost? $18,890-$21,390 at 50 tons, $28,639-$32,390 at 65 tons, $33,989-$35,299 at 100 tons, per dealer listings checked 21 Nov 2026, before tooling.

What does the tonnage buy? Punching force: a 50-ton machine puts a 1-1/4″ hole through 1/2″ plate and shears 4x4x3/8 angle; higher tiers handle thicker plate and bigger sections.

What operations does one machine do? Punch, shear flat bar, shear angle, notch and bend, five workstations on one hydraulic ram, plus attachment-driven extras like pipe notching.

Why do voltage variants cost different amounts? Each motor/starter package is priced separately; the Edwards 100-ton spans $1,310 across five voltages, so match your shop’s service.

Are used ironworkers a good buy? Often; frames last decades. Judge the hydraulics and the tooling availability, and budget fresh blades and punches into any used price.

Ironworker or standalone machines? Small shops win with consolidation; production lines on a single operation outgrow the shared-ram format and buy dedicated machines.

See our press brake guide, our plasma cutter guide, our MIG/GMAW welder guide, our waterjet guide, and our hydraulic shear guide and our tube bender guide and our metal band saw guide and how we research prices.

Updated November 2026. Sources: Trick-Tools Scotchman listings, The Power Tool Store Edwards 65-ton listing and Edwards 100-ton listing, all checked 21 November 2026. Prices exclude tooling; confirm voltage before ordering.

Leave a Comment

Your email address will not be published. Required fields are marked *

Scroll to Top