A rotary draw tube bender costs $8,015-$11,584 for the hydraulic Baileigh RDB-175, $13,099-$16,093 for the programmable RDB-250, $17,169-$24,816 for the RDB-325 and $23,544-$34,030 for the RDB-350, quoting the sale-to-list spread at one dealer on 21 November 2026, and every one of those prices is for a bender with no dies: the die sets that actually touch the tube are separate line items, and a working die library routinely rivals the machine’s own cost. Manual benders sit below this ladder at quote-only and hobby-kit prices.
| Grade / Item | Low | High | Unit |
|---|---|---|---|
| RDB-175 hydraulic (sale / list) | 8,015 | 11,584 | USD |
| RDB-250 / Deluxe Kit (sale) | 13,099 | 17,686 | USD |
| RDB-325 (sale range seen / list) | 17,169 | 24,816 | USD |
| RDB-350 (sale / list) | 23,544 | 34,030 | USD |
The Baileigh RDB ladder, list and sale
| Model | Drive | List price | Sale price seen |
|---|---|---|---|
| RDB-175 (2.5″ OD, hydraulic) | Hydraulic, 110V | $11,584 | $8,015 |
| RDB-250 (2.5″ OD, 170 programs) | Electric planetary, 220V | $16,093 | $13,099 |
| RDB-250 Deluxe Kit | Electric planetary | $21,663 | $17,686 |
| RDB-325 (programmable) | Electric | $24,816 | $17,169-$20,199 |
| RDB-350 | Electric | $34,030 | $23,544 |
Trick-Tools listings, checked 21 November 2026. We saw the RDB-325’s sale price quoted at two different figures on two pages of the same dealer on the same day, which is why we anchor on list prices and treat sale figures as a range; discounts move week to week, list prices don’t.
What the steps buy: hydraulic, programmable, capacity
The ladder’s steps are legible. The RDB-175’s money buys hydraulic muscle on 110V house current, bending 2-1/2″ mild steel tube with manual control, the rollcage-shop entry point. The RDB-250’s roughly $5,000 premium buys programmability: a touchscreen storing 170 programs, an electric planetary drive running a 180-degree bend in about nine seconds, and repeatability, the same bend on the hundredth part as the first, which is the difference between building one chassis and building chassis for customers. The 325 and 350 steps buy capacity and heavier framing for bigger tube and pipe. The pattern matches every fabrication ladder we track: the first tier buys force, the second buys control, the later tiers buy size, and the honest question is which one your order book actually needs.
Dies: the second machine you’re buying
Rotary draw bending works by wrapping tube around a die matched exactly to the tube’s outside diameter and the bend’s centerline radius, one die set per OD-and-radius combination. The dealer’s accessory pages price die packages separately from every bender, and a shop bending three tube sizes at two radii each needs six die sets before the machine earns anything. That arithmetic is the category’s defining cost structure, the same tooling-outlives-machines economics as press brake dies and ironworker punches, and it drives two practical rules. First, price the die library for your actual work alongside the machine; the deluxe kits that bundle common sizes exist because the bundle beats piecemeal pricing. Second, die compatibility anchors brand loyalty: a shop with a drawer of Baileigh dies buys its next Baileigh for the same reason a shop full of Promecam press tooling stays Promecam.
Rotary draw, roll and crush: buying the right bending
Rotary draw is the technology for tight, precise, repeatable bends in tube that must keep its section, rollcages, chassis, handrails, furniture. Roll benders, three rollers walking a gentle curve into tube or profile over multiple passes, are a different and often cheaper machine for large-radius sweeps, awnings and arches. Crush-style conduit and pipe benders, cheaper still, are for plumbing and electrical work where a kinked inner wall doesn’t matter. The buying mistake in this category is paying rotary-draw money for work a roll bender does better, or expecting a crush bender to produce chassis tube. Mandrel bending, rotary draw with an internal mandrel supporting the tube wall, sits above everything here in both quality and price, and is the tier to quote when thin-wall exhaust or polished stainless work is the business.
Who buys which tier
The hydraulic tier sells to rollcage and off-road shops, motorsport garages and serious hobbyists building a chassis or two a year, work where the operator watches a degree wheel and repeatability lives in patience. The programmable tier belongs to shops selling bent parts, exhaust builders, furniture makers, handrail fabricators, small chassis manufacturers, where the hundredth part must match the first without an operator’s attention, and where nine-second bends compound into real throughput. The larger-capacity models serve structural and pipe-heavy work. Below the whole ladder, manual benders, long-handle leverage machines sold as kits and bare frames, remain the honest entry for a first project; they bend the same tube with sweat instead of hydraulics, and many production shops keep one for odd jobs beside the CNC machine.
Setup, springback and the learning curve
Rotary draw bending has a craft layer that no sticker shows. Tube springs back after every bend, by an amount that varies with material, wall thickness and diameter, so a 90-degree part needs an over-bend the operator or program must learn per tube spec; programmable machines store the correction, manual and hydraulic machines store it in the operator’s notebook. Wall thinning on the outside of the bend and wrinkling on the inside are the failure modes, managed by die fit, lubrication and, at the demanding end, mandrel support. The practical consequence for buyers: budget scrap tube for dialing in every new OD-radius-material combination, and treat a die that matches your tube exactly, not nearly, as non-negotiable, because a loose die is where wrinkles come from. This is also why used benders with full die sets command strong prices: the dies carry the setup knowledge’s hardware half.
Our analysis
Programmability is the best-priced step on the ladder. About $5,000 separates the hydraulic RDB-175 from the programmable RDB-250 at sale prices, and it buys repeatability that turns a fabrication tool into a production tool; shops selling bent parts should start the conversation at the programmable tier.
Budget the dies as a second machine. Every listed price is a bender with nothing to bend against; the die library for a real shop’s tube menu is thousands more, the bundles exist because the market knows it, and the die drawer, not the machine, is what locks in the next purchase.
Practical advice
- List your tube ODs and radii first; the die count prices the project better than the machine sticker does.
- Anchor comparisons on list prices; sale figures at the same dealer moved within a day in our checks.
- Production work wants the programmable tier; one-off fabrication lives happily on hydraulic control.
- Large-radius sweeps belong on a roll bender, not a rotary draw machine; match the technology to the curve.
- Thin-wall or polished work? Quote mandrel bending before promising the finish.
FAQs
How much does a tube bender cost? Hydraulic rotary draw from $8,015 on sale ($11,584 list), programmable models $13,099-$23,544 on sale ($16,093-$34,030 list) at one dealer on 21 Nov 2026, plus dies.
Are dies included? No; die sets are priced separately per tube OD and bend radius, and a working library can rival the machine’s cost. Bundled kits price better than piecemeal.
What does programmable buy over hydraulic? Stored programs and repeatability, the same bend every time, which is what production work pays for; the step costs about $5,000 at sale prices.
What size bender for rollcage work? The 2-1/2″ OD capacity class covers common chassis and cage tube, including 2″ chrome moly on the RDB-250; pair it with the TIG torch in our welding guides.
Tube bender or roll bender? Tight, precise bends: rotary draw. Long, gentle sweeps: roll bender. They are different machines for different curves, and each does the other’s job badly.
Why do sale prices vary so much? Dealer promotions move weekly, and we caught one model at two sale prices on the same day; list prices are the stable comparison point.
See our ironworker guide, our press brake guide, our hydraulic shear guide, our TIG welder guide, and our metal band saw guide and how we research prices.
Updated November 2026. Sources: Trick-Tools RDB-175 listing and RDB-250 listing (cross-listed RDB-325/350 figures), both checked 21 November 2026. Dies sold separately; sale prices fluctuate, compare at list.


