A name-brand AC/DC TIG welder starts around $1,750 on current dealer pricing for the Lincoln Square Wave TIG 200, runs $2,439-$6,978 across Miller’s MaxStar DC lineup, $3,546 for the Syncrowave 212 package, and climbs to $13,332-$18,240 for Syncrowave 300 and Dynasty 300 shop packages (dealer listings, 21 November 2026). The used market offers transformer-era muscle cheap: pre-owned Syncrowave 250s at $2,250 against $5,000 list. Budget import inverters sell well under $1,000 but are a different product class, as we explain below.
| Grade / Item | Low | High | Unit |
|---|---|---|---|
| Miller MaxStar 161 (DC portable) | 2,439 | 3,369 | USD |
| Miller Dynasty 210 (new, by config) | 6,599 | 8,251 | USD |
| Shop packages (Syncrowave 300 / Precision TIG / Dynasty 300) | 13,332 | 18,240 | USD |
| Used transformer Syncrowaves | 2,250 | 3,500 | USD |
Live dealer prices: the name-brand ladder
| Machine | Class | Price |
|---|---|---|
| Lincoln Square Wave TIG 200 | AC/DC hobby-pro crossover | $1,750 (list $2,500); a second dealer lists it at $3,386 marked discontinued |
| Miller MaxStar 161 STL (TIG/Stick) | DC portable | $2,439 to $3,369 by package |
| CK Worldwide MT200 AC/DC system | AC/DC inverter | $3,880 |
| Miller Syncrowave 212 package | AC/DC shop | $3,546 |
| Miller MaxStar 210 / 210 DX | DC industrial | $5,798 to $6,978 |
| Miller Dynasty 210 (new) | AC/DC inverter flagship class | $6,599 to $8,251 by config |
| ESAB Renegade Volt ES 200i | Cordless Stick/TIG | $6,731 |
| Miller Syncrowave 300 packages | AC/DC shop runner | $13,332 to $15,526 |
| Lincoln Precision TIG 275 / 375 Ready-Pak | Transformer shop machines | $14,088 / $17,493 |
| Miller Dynasty 300 complete package | Premium AC/DC inverter | $18,240 |
Gas and Supply and WeldingPro dealer listings, 21 November 2026. Used examples from the same day: pre-owned Syncrowave 250 at $2,250, used Syncrowave 210 at $3,500, and an IdealArc TIG 250 AC/DC at $2,500 against a $5,000 list.
DC-only or AC/DC: the aluminum question
The spec that splits this market in half is AC output. Steel and stainless TIG-weld on DC, which is why Miller’s DC-only MaxStar line exists and underprices comparable AC/DC machines by thousands; aluminum needs AC, which is what Square Wave, Syncrowave and Dynasty sell. The first budgeting question is therefore not amps but material: a shop that will never touch aluminum saves $2,000-$4,000 buying DC-only at every tier, while anyone with aluminum in the plan should buy AC/DC the first time, because no firmware unlock adds a polarity later. Amperage buys thickness capacity and duty cycle on top: 200-amp machines handle most fabrication, and the 300-amp shop packages earn their five figures in production duty cycles and thick sections.
Transformer, inverter and why used Syncrowaves are cheap
The $2,250 used Syncrowave 250 against an $18,240 Dynasty 300 package is not a trick; it is two technology generations priced honestly. Transformer machines like the older Syncrowaves and Lincoln’s Precision TIG line are heavy, power-hungry, nearly immortal, and produce a famously smooth arc; shops with three-phase supply and no need to move the machine buy them used at a third of list and weld happily for decades. Inverters (MaxStar, Dynasty, the Square Wave, every import) weigh a tenth as much, sip power, run on wider input ranges, and add pulse and waveform controls transformer iron cannot; their electronics are also what eventually fails, which is why brand support matters more for inverters. The honest matrix: stationary shop with cheap used supply, transformer; mobile work, modern features or aluminum waveform control, inverter.
The budget import tier, honestly
Under the name brands sits a deep tier of import inverters (PrimeWeld, Everlast, Yeswelder and store brands) selling AC/DC machines for a fraction of the Miller blue and Lincoln red above, widely available through Amazon and eBay. We do not print their prices here because they move weekly, but the structural trade is stable: you give up dealer service networks, parts availability years out, and resale value, and you often get surprisingly capable welding in return. The pattern among professionals is consistent: hobbyists and second machines go import; machines a business depends on daily go name-brand, for exactly the warranty-and-parts logic that runs through our laser welding guide. Buy the import knowingly or the brand deliberately; the mistake is paying brand money for import support or expecting brand support at import money.
The torch, gas and everything around the arc
TIG’s accessory stack is real money. The torch and its consumables (collets, cups, tungstens) are ongoing costs, and package listings above differ exactly there, in foot controls (wireless adds hundreds, visible in the Syncrowave 300 package gap), water-cooled torches on the shop machines, and carts. Argon is the running cost every TIG owner meets: cylinder rental or purchase plus refills, consumed every arc-hour. Budget a helmet with a quality lens, gloves and a cart with the machine, and on any used purchase, assume the torch is tired and price a fresh one. These add-ons explain much of the spread between bare-machine and “complete package” prices in the table, and comparing quotes package-to-package is the only fair way.
Matching the machine to the work
The tiers sort cleanly by use case. Hobbyists and small fab shops live happily at the Square Wave TIG 200 and CK MT200 level: 200 amps of AC/DC covers automotive, furniture and general fabrication in steel, stainless and aluminum sheet-to-quarter-inch work. Mobile welders and maintenance techs buy the MaxStar portables for DC work on pipe and structural steel, where the 40-pound inverter in a truck earns its $2,439-$3,369 daily; the cordless ESAB extends the same logic to sites without power. Production shops running TIG stations all shift buy the Syncrowave 300 and Dynasty packages because duty cycle, water-cooled torches and waveform control are throughput, not luxury, at that intensity. And specialty aluminum work, aerospace, marine, anything with thin or anodized material, is where Dynasty-class waveform shaping genuinely out-welds everything below it, which is what its five-figure package price actually buys. Buying one tier above your real duty cycle is the most common overspend in this market; the machine does not weld better at 20% duty than a cheaper one rated for it.
Our analysis
The Square Wave TIG 200’s dealer spread is the market lesson. One dealer sells it at $1,750 on sale; another lists $3,386 and marks it discontinued. When a popular model approaches end-of-line, pricing fractures exactly like this, and buyers who shop two dealers capture the difference. The same machine, the same day, nearly double the price: always benchmark welding equipment across at least two sellers.
Used transformer machines are the value anomaly. Nothing else in the welding market delivers as much proven capability per dollar as a $2,250-$3,500 used Syncrowave, provided you have the power supply and the floor space, and their mechanical simplicity makes them safer used buys than used inverters.
Practical advice
- Decide aluminum first; it picks AC/DC versus DC-only and sets the budget tier.
- Compare complete packages (torch, foot control, regulator), not bare power sources.
- Benchmark two dealers minimum; end-of-line pricing varies wildly, as the Square Wave shows.
- On used inverters, test every mode and the fan; on used transformers, mostly just weld with it.
- Budget argon supply and a quality helmet alongside the machine.
FAQs
How much does a TIG welder cost? Name-brand: $1,750-$3,880 entry AC/DC and DC portables, $5,798-$8,251 industrial inverters, $13,332-$18,240 shop packages (dealer listings, 21 Nov 2026). Used transformer machines: $2,250-$3,500. Import inverters: well under $1,000, different support class.
Do I need AC/DC? Only for aluminum; DC-only machines save thousands if you never will.
Why is a used Syncrowave so cheap? Transformer technology: heavy and power-hungry but nearly immortal; a third of list is normal and a genuine bargain for stationary shops.
Miller or Lincoln? Parity at every tier, as across welding; buy the dealer relationship and package value, not the color.
What recurring costs come with TIG? Argon, tungstens and torch consumables; every arc-hour spends a little of each.
Are cordless TIG machines real? Yes; ESAB’s battery Renegade Volt lists at $6,731, priced as the site-work convenience it is.
See our MIG/GMAW welder price guide, our laser welding machine guide, our PTA welding guide, our robotic welding guide, and our plasma cutter price guide and our tube bender guide and our welding positioner guide and how we research prices.
Updated November 2026. Sources: Gas and Supply TIG listings and WeldingPro listings, both checked 21 November 2026. Prices change; benchmark at least two dealers.


